Sika MonoTop-3020 is a 1-part, cementitious polymer modified, low shrinkage surfacing/ finishing mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations.
Dust reduced - Application up to 5 mm in 1 layer on vertical and horizontal applications
High early strengths even at low temperatures
Good surface finishing - Low cracking sensitivity
Sulphate resistant - Hand and machine application (wet spray technique)
Very good resistance to water and chloride penetration
Sika MonoTop-3020 is a 1-part, cementitious polymer modified, low shrinkage surfacing/ finishing mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations.
May only be used by experienced professionals.
Thin layer render
Use as a concrete pore filler/ levelling mortar
Repairing of minor defects (pores and honeycombed concrete)
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Sika Monotop 3020 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
We no longer stock this product, but can recommend Sika Monotop 1010 as a great alternative. Sika MonoTop 610 is a one component, cementitious-based steel reinforcement primer and bonding bridge for concrete repair mortars. Features and BenefitsOnly requires mixing with water Active corrosion inhibitors for added protection Sprayable...
SikaTop Armatec 110 EpoCem is a bonding primer and reinforcement corrosion protection. It is a cementitious, epoxy resin compensated three component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. Features and Benefits: Contains EpoCem technology - improved bonding agent Extended...
We no longer stock this product, but can recommend Sika Monotop 4012 as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...
Sika MonoTop-1010, bonding primer and reinforcement corrosion protection cement based slurry containing recycled waste materials, for use with concrete and steel.Suitable for control of anodic areas (Principle 11, method 11.1 of EN 1504-9) Interior and exterior use Easy to use, just add water Good resistance to water and chloride...
Sika MonoTop-4012, a cementitious R4 concrete repair mortar containing recycled waste materials for restoration work, structural strengthing, and preserving or restoring passivity.Repairs to all types of reinforced concrete structures and components for:Buildings, civil engineering structures Marine structures, dams Structures...