

Remmers RM (formerly Restoration Mortar) is used for restoring, supplementing and re-profiling mineral substrates such as natural stone, brick, concrete and synthetic stone.
Remmers RM (formerly Restoration Mortar) is used for restoring, supplementing and re-profiling mineral substrates such as natural stone, brick, concrete and synthetic stone. It can also be used to reproduce ornamental building elements in a tamping procedure.
Remmers RM is a ready-to-use, pre-mixed, dry mortar made of mineral raw materials (binder and aggregates). Its physical characteristics correspond to the requirement for the lowest possible inherent stress and physical-mechanical properties that are coordinated to the natural stone substrate (compressive and bonding strength, water transport, etc.).
The restoration mortar is a component in the Remmers Restoration Mortar System (with two different strengths: n = normal strength, Art. No. 0742, 0746, 0749 and s = soft, reduced strength Art. No. 0786-0788) and thus corresponds to the requirements stated in Professor Snethlage's Guideline for Preserving Stone.
The grains of the aggregates essentially correspond to those of fine-grained sandstone. Substrate specific modifications in the coarse and fine grain range are possible.
Grain:
The bags offered here to order are normal strength, non hydrophobic with medium granulation in the colours offered. If desired, the mortar can also be formulated hydrophobic, have soft stregnth, come in differing granulation and be colour matched to samples - for more information contact our Technical Department.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
![]() | Question:
Hi to what depth can it be applied, I have stone edges need repairing up too 24mm in depth. Kind regards. Scott |
Answer from Rawlins’ Technical Team:
The Remmers Restoration Mortar can be applied in layers up to 3cm in thickness. | |