

Remmers Restoration Mortar ZF is a ready-to-use, factory-mixed, dry mortar excellently suited for re-profiling weathered, mineral substrates so that they look like the original.
Remmers Restoration Mortar ZF is a ready-to-use, factory-mixed, dry mortar made of pure mineral raw materials (binders and aggregates). Its physical characteristics correspond to the requirement for the least possible inherent stress.
Due to its low compressive and tensile bending strength and low E-modulus, it is particularly suitable for substrates of lesser strength. The "normal" grains of the aggregates (≤ 0.5mm) correspond in general to that of fine-grained sandstone. The product is available in two versions: "fine" (≤ 0.2mm) and "coarse" (≥ 2mm).
If a representative sample is sent in, colour and grain can be matched at the plant without any mentionable deviations as a rule, however, the possibility of tinting to match the specific object is limited due to the NHL binder base. If colours change or are mottled, the desired colour should be clearly marked on a sample.
Special colours are available upon request - please contact our Technical Department for more details.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Remmers Restoration Mortar ZF is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT