Keim Restauro Joint Mortar
  • Keim Restauro Joint Mortar

Keim Restauro Joint Mortar

KEI1042

Keim Restauro Fuge is a mineral dry bagged premixed restoration mortar with hydraulic binders. Functions as a joint replacement material, especially for natural stone walls.

Top Features

  • Easy to apply.
  • Can be colour matched to the stone.
  • Long-lasting.

This product is available as POA. Click here to email us for more information

Colour
  • Current colour: Keim Natural S079
Choose a colour
Close colour picker
  • Keim Natural S003
  • Keim Natural S005
  • Keim Natural S007
  • Keim Natural S017
  • Keim Natural S019
  • Keim Natural S041
  • Keim Natural S043
  • Keim Natural S049
  • Keim Natural S053
  • Keim Natural S057
  • Keim Natural S059
  • Keim Natural S063
  • Keim Natural S065
  • Keim Natural S066
  • Keim Natural S068
  • Keim Natural S070
  • Keim Natural S071
  • Keim Natural S073
  • Keim Natural S075
  • Keim Natural S079
  • Keim Natural S080
  • Keim Natural S081
  • Keim Natural S083
  • Keim Natural S085
  • Keim Natural S087
  • Keim Natural S089
  • Keim Natural S103
  • Keim Natural S105
  • Keim Natural S107
  • Keim Natural S109
  • Keim Natural S110
  • Keim Natural S112
  • Keim Natural S113
  • Keim Natural S114
  • Keim Natural S115
  • Keim Natural S117
  • Keim Natural S119
  • Keim Natural S122
  • Keim Natural S143
  • Keim Natural S145
  • Keim Natural S147
  • Keim Natural S148
  • Keim Natural S149
  • Keim Natural S153
  • Keim Natural S155
  • Keim Natural S157
  • Keim Natural S161
  • Keim Natural S163
  • Keim Natural S165
  • Keim Natural S168
  • Keim Natural S183
  • Keim Natural S187
  • Keim Natural S189
  • Keim Natural S193
  • Keim Natural S195
  • Keim Natural S198
  • Keim Natural S199
Size
Quantity

Description

Keim Restauro Fuge is a mineral dry bagged premixed restoration mortar with hydraulic binders. Functions as a joint replacement material, especially for natural stone walls. It can also be used for facing masonry (brick, sandstone) for joint repairing.



Top Features & Benefits


  • Easy to apply.
  • Can be colour matched to the stone.
  • Long-lasting.
  • Bulk density: approx. 1.55g/cm3.
  • Water consumption: approx. 0.17 lt/kg.
  • Processing time: max 45min.
  • Setting time: more than 8 hours.
  • Compressive strength: approx. 8N/mm².
  • Bonding tensile strength: approx. 3N/mm².
  • Modulus of elasticity: approx. 9KN/mm².



Preparation & Application


Substrate Preparation
Remove loose material and old coats mechanically or with a water pressure jet. All loose and friable material should be cut back to a sound level.

Preparation
Keim Restauro Fuge is to be mixed only with clean cold water, approximately 5lt per 30kg. For larger quantities use stirring machine or mixer. After a ripening period of 5 minutes the mortar should be of light flow properties. For moulding silicate resin moulds should be used.

Application
Press the prepared joint mortar firmly into the joint with a jointing tool. The new joint material should not be smoothed at the surface. For flush joints, Keim Restauro Fuge should be applied proud of the stone surface and any excess then removed with a palette knife during setting.

Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.

Consumption
Approx. 0.2kg per linear metre for a joint depth and breadth of 1cm x 1cm. Determine actual consumption by tests on trial areas. Consumption rates are offered for guideline purposes only. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.

Cleaning of Tools
Clean tools with water immediately after use.

Product Details
KEI1042

Data sheet

Manufacturer
Keim
For Use On
Stone, Brick, Masonry
Application Method
Palette Knife
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
30KG
UN Number
N/A
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send