

International Interzone 101 is a two component, solvent free epoxy which can be applied underwater to give a corrosion and abrasion resistant coating. Intended for use as a hand-applied repair compound for application to submerged steelwork and splashzone areas of offshore jackets, piling and other permanently wet areas where conventional coatings can not be used.
Please note: this product is made to order, with a 10-working day lead time
International Interzone 101 is a two component, solvent free epoxy which can be applied underwater and will cure underwater to give a corrosion and abrasion resistant coating.
In most circumstances International Interzone 101 is applied direct to steel and is not overcoated. Where a blast holding primer may be required then Interline 982 should be used and must be overcoated within a maximum of 10 days.
Intended Uses
Mixing
Only one 12 litre unit should be mixed at a time. To remove contents from their tins, cut both the top and bottom of the tin using a tin opener and push the material out. In cold weather, warming may be necessary.
Mixing should be carried out on a large, clean, smooth sheet of steel, tinplate or hardboard using palette knives, scraper blades or trowels. DO NOT ADD WATER OR THINNERS TO THE MIX as this will reduce the strength of the cured composition. The material should be thoroughly mixed until the separate yellow and blue colours have been completely merged to a bright green colour, free of yellow and blue streaks. Avoid beating air into the mixture and 'fold' the components together.
Application
International Interzone 101 is a specialist product designed for a specific end use. Detailed application instructions are available from Technical Data Sheet and Application Guidelines document both available for download from the 'Datasheets' tab above.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
![]() | Question:
Is it necessary to agitate each part or both mixed? |
Answer from Rawlins’ Technical Team:
The material should be thoroughly mixed until the separate yellow and blue colours have been completely merged to a bright green colour, free of yellow and blue streaks. | |
International Interzone 101 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT