Surfaces should be clean, firm and free from dust, dirt or other material liable to impair adhesion
Mixing:
CS100 Epoxy Primer hardens by a chemical reaction. It is essential that the mixing instructions are strictly adhered to:
Stir Part 1 and Part 2 thoroughly before transferring Part 2 into the Part 1 container
Using a slow speed drill fitted with a Tremco two bladed propeller (not a cement paddle), mix the contents for 4 - 5 minutes to obtain uniformity in colour and consistency
Ensure all materials from the base and sides of the containers are mixed in thoroughly to ensure a uniform cure
Do not mix more 5 kg units than can be used within the working pot life
Mixed primer has a working time of approximately 1 hour after which any unused primer MUST be discarded
Application:
Apply a thin coat to the substrate using a foam or short pile roller, paint brush or squeegee taking care to prevent the formation of puddles
On smooth impervious substrates, application by squeegee is the most effective way to quickly obtain a very thin film
Leave the coating to dry to a translucent, tacky film (usually 3 to 6 hours with a paint roller or brush applications and 1 to 3 hours with a squeegee application - depending on substrate, temperature and ventilation). If in doubt, leave overnight
Once dried, the primed surface is ready for overlaying (e.g. to receive Tremco smoothing compounds) and must be kept free of contaminants
If more than 24 hours have elapsed since the application, then a repeat application of the primer may be required
Technical Data:
Property
Result
Composition
A two part water based epoxy primer and bonding agent
Working Time
20°C: 1 hour
Coverage
15 to 20m² per kg depending on the substrate and method of application
Storage
Store in shaded dry conditions between +5°C and +25°C. Protect from frost
Shelf Life
6 Months when stored in its original unopened containers. Rotate stocks using oldest material first
Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Product Details
5589-888111
Data sheet
Manufacturer
Tremco
Interior / Exterior Use
Interior
Water / Solvent Based
Water
For Use On
Power floated concrete, Precast Concrete, Terrazzo, Glazed Ceramic Tiles, Quarry Tiles, Hard Flooring Grade Asphalt, Rigid metal
Application Method
Brush, Roller, Squeegee
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
5KG
Dry to Recoat (at 20°C)
3 to 6 hours (roller or brush applications), 1 to 3 hour (squeegee application) - depending on substrate, temperature and ventilation. If in doubt, leave overnight
Pot Life (at 20°C)
1 Hour
Coverage
15 to 20 m² per kg depending on the substrate and method of application
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tremco CS100 Epoxy Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tremco ES100 One Coat Universal DPM is a two part, epoxy based damp proof membrane. It has been developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application.
Accommodates up to 97% RH
Solvent free
Very cost...
Tremco ES200 Fastrak Fast Curing Universal DPM is a solvent free, two part, epoxy based damp proof membrane which achieves emicode EC1 status. Developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application....
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. See our Waterproofing and Dampproofing page for more repair materials.
We no longer stock this product, but can recommend Sikafloor 122 Level as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...
Tremco SX250 Moisture Tolerant Smoothing Compound is a pre-smoothing and repair compound for clean, sound, porous substrates. SX250 is specifically designed for preparation of interior applications and can be applied by hand or by pump.
Suitable for use below a damp proof membrane
High compressive strength for heavy traffic applications...
Tremco SX500 Rapid Drying Smoothing Compound is a protein free moisture tolerant, fast drying, smoothing compound for interior applications. SX500 is designed for application to existing floors prior to the application of floor coverings including: vinyl, carpets, ceramic tiles, wood, etc.
Accepts both textile and resilient floor coverings...
Tremco SX600 High Performance Smoothing Compound is a protein free, moisture tolerant smoothing underlayment that can be used over old adhesive residue in interior applications. SX600 has been designed for levelling uneven subfloors and is well suited to areas that require low odour products.
Walk on after 2 hours, floor coverings can be...
