Sika 1 Screed Mortar
  • Sika 1 Screed Mortar

Sika 1 Screed Mortar

SK1SCREMORT

Sika 1 Screed Mortar is part of the Sika 1 Structural Waterproofing System and is the third layer of the floor screed system.

  • Supplied in pre-batched blue banded bags for easy identification and use
  • When mixed with Sika 1 Waterproofer Liquid Admixture it produces part of a complete structural waterproofing system for floors

Features and Benefits

  • 90 years track record
  • Type A waterproofing system according to BS8102- 2009
  • Proven resistance to hydrostatic back pressure
  • Fully bonded waterproofing barrier
  • Can be applied to wet substrates
  • For use on concrete, brick and structural blockwork
  • Can be used internal and externally
  • Quality controlled system
  • Used for negative or positive water pressure situations
Colour
Size
£30.09
VAT excluded

£36.11 Tax incl.
Quantity

Description

Sika 1 Screed Mortar is part of the Sika 1 Structural Waterproofing System and is the third layer of the floor screed system. Supplied in pre-batched blue banded bags for easy identification and use. When mixed with Sika 1 Waterproofer Liquid Admixture it produces part of a complete structural waterproofing system for floors, contains no impurities and can be applied internally and externally for brick, concrete and stone substrates.

Sika 1 Screed Mortar is pre-batched kiln dried blends of specially graded aggregates and cements packaged in the appropriate mix ratios for optimum application performance and durability. When mixed with the diluted Sika 1 Waterproofer Liquid Admixture it provides part of the multi-coat system for structural waterproofing screed systems.

Uses

  • Internal waterproofing of below ground structures to meet the requirements of BS8102 – 2009 Grades 1 - 3
  • Waterproofing of swimming pools and other water retaining structures
  • Waterproofing of basements, cellars and vaults
  • Waterproofing of tunnels

Features and Benefits

  • 90 years track record
  • Type A waterproofing system according to BS8102- 2009
  • Proven resistance to hydrostatic back pressure
  • Fully bonded waterproofing barrier
  • Can be applied to wet substrates
  • For use on concrete, brick and structural blockwork
  • Can be used internal and externally
  • Quality controlled system
  • Used for negative or positive water pressure situations

For more details please download the product data sheet from the 'DATASHEETS' tab above.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
SK1SCREMORT

Data sheet

Manufacturer
SIka
Interior / Exterior Use
Interior and Exterior
For Use On
Concrete, Brickwork
Application Method
Trowel
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
25KG
Coverage
0.6m² @ 20mm per 25kg

questions Trevor Dickson on 2016-04-04 17:58:12
Question: 

The floor has high levels of moisture rising through the substrate which has caused the self levelling compound to degrade & due to the hydrostatic pressure within the substrate this has blown or detached from the substrate. This area is in a private lawn bowls club house. The final covering to the floor is Karndean. Is this Sika product suitable for repairing this floor?

Answer: 

Sika 1 Screed Mortar would be suitable for your floor but it must be used as part of a system which includes the use of Sika 1 Spritz and Bonding Coat Mortar and Sika 1 Waterproofer Liquid Admixture. Please download the 'Sika 1 Waterproof System TDS' from the 'DATASHEETS' tab on the product page for full details on preparation, application and consumption.


Question about the product

* Required fields
(read)
Send