Sikafloor 155 WN is a 2-part water based epoxy resin primer that is solvent-free and can be used as a primer and adhesion promoter on properly prepared concrete and cementious screeds, as well as a primer for other Sikafloor products.
As a primer and adhesion promoter on properly prepared:
- New concrete
- Cementitious screeds
- Hardened concrete
- Existing epoxy floor coatings
- EpoCem levelling layers
As a primer for:
- Sikafloor 81 EpoCem
- Sikafloor 82 EpoCem
- Sikafloor 20 PurCem
- Sikafloor 21 PurCem
- Sikafloor Level 25
Features and Benefits:
- Easy and fast to apply
- Especially suitable for highly absorbent substrates
- Water dispersed and odourless
- Can be applied in unventilated areas
- Longer pot life than Sikafloor 155W
- Very good bond strength over its whole application temperature range
- Environmentally friendly
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||2 - 3.3m² per kg|
|Touch Dry||6 Hours|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close