Sikafloor 131 Level Latex Ultra

Sikafloor 131 Level Latex Ultra (previously known as SIkaLevel 30 Latex Ultra) is a high strength rapid setting cement based powder, which when mixed with water, can be used to level out uneven floors and screeds. It may be overlaid with common floor coverings or may be left as a final wearing surface and can be applied in one coat from 2-10mm in depth (25mm when filled).

Features and Benefits 

  • Fast setting, foot trafficable within 2 hours, can be tiled within 3 hours
  • Interior & exterior use
  • Can withstand vehicular traffic
  • Final wearing coat
  • Overpaintable
  • Water and frost resistant
  • Application depth 2-10mm
  • Tested to EN13813 Class CT – C30-F7-AR 0.5

Colour
Size
£21.99
VAT excluded

£26.39 Tax incl.
Quantity

Description

Sikafloor 131 Level Latex Ultra (previously known as SIkaLevel 30 Latex Ultra) is a high strength rapid setting cement based powder, which when mixed with water, can be used to level out uneven floors and screeds. Sikafloor 131 Level Latex Ultra may be overlaid with common floor coverings or may be left as a final wearing surface. Sikafloor 131 Level Latex Ultra will even accept light vehicular traffic and may be applied in one coat from 2-10mm in depth (25mm when filled).

Typical surfaces include concrete and screeding, existing unglazed ceramic tiles, brick, stone etc. When mixed as directed, the compound provides a free flowing mix that may be walked on in 2 hours and can be overlaid with ceramic tiles after only 3 hours at normal temperatures. NOTE: when overlaying with other floor coverings allow 24 hours drying time for each 10mm depth. Tested to EN13813 Class CT – C30-F7-AR 0.5.

Features & Benefits

  • Fast setting, foot trafficable within 2 hours, can be tiled within 3 hours
  • Interior & exterior use
  • Can withstand vehicular traffic
  • Final wearing coat, Overpaintable
  • Water and frost resistant
  • Application depth 2-10mm
  • Tested to EN13813 Class CT – C30-F7-AR 0.5

Areas For Use

For Levelling:

  • Wooden flooring
  • Floating floors
  • Floors with underfloor heating
  • Sand/cement screeds (not anhydrite), concrete slabs and pre-cast elements.
  • Existing ceramic and rigid plastic tiles.

For more details please download the product data sheet from the 'DATASHEETS' tab above.

Product Details

Data sheet

Manufacturer
Sika
Interior / Exterior Use
Interior and Exterior
For Use On
Concrete, Sand Screed, Cement Screed, Ceramic Tiles,
Application Method
Trowel
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Product Certifications
Tested to EN13813 Class CT – C30-F7-AR 0.5
Pack Size
25KG
Coverage
5m² per 25kg at 3mm thick
Touch Dry
2 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Andy  on 2020-04-15 19:15:54
Question: 

Hi, does this product (sika floor 131 level latex ultra )require much trowelling or can it be poured and spread to find own level? Application is the uneven surface of a 25 Sq m concrete pad for a shed. Thanks Andy

Answer: 

Sikafloor 131 Level Latex Ultra when you pour the mixture out onto the prepared floor it does find its own level, but requires trowelling down lightly to achieve an overall thickness not exceeding 10 mm per coat.

questions Nigel on 2019-11-04 22:06:26
Question: 

We have removed old parquet flooring and Black bitumen type glue still tacky on concrete floor. Can we use this product directly to level floor ?

Answer: 

You would have to remove at least 60% of the bitumen and the remainder has to be spread evenly across the floor then prime the area with SCHÖNOX VD 1:1 with water. Once completely dry level with SCHÖNOX HS 10 F.

questions mark Dickson on 2019-09-29 10:13:56
Question: 

Will the concrete base I am applying the Sikalevel 30 latex ultra to have to be primed or is OK to apply without? Thanks Mark.

Answer: 

Please refer to the product data sheet available from the 'Attachments' tab on the product page. At the time of writing this the current version shows details of the preparation and application required on page 2.

questions mark Dickson on 2019-09-29 10:10:04
Question: 

Can I use the Sikalevel 30 latex ultra to level an existing concrete pad on to which a hot tub is going to sit?. The hot tub will be 1200Kg when filled. Thanks Mark.

Answer: 

SikaLevel 30 Latex Ultra has a compressive strength of 30 N/mm² so it would depend on the specification of the hot tub manufacturer in regard to a suitable substrate.

questions Peter on 2019-07-08 12:00:52
Question: 

Can I apply Epoxyshield garage floor paint kit or Epoxy hield Maxx direwctly on top of a floor that has been self-levelled using Sikalevel 30 Latex Ultra? Also which version of the above is recommended for a domestic garage, as little between the 2? Thanks

Answer: 

Yes either product could be applied over this levelling screed, for a small domestic garage the Rust-Oleum Epoxyshield Garage Floor Coating Kit would be recommended.

  

Question about the product

* Required fields
(read)
Send