- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
Rust-Oleum 6570 Basecoat Rapid SL
We no longer stock this product, but can recommend Sikafloor Level 30 as a great alternative.
Rust-Oleum 6570 Basecoat Rapid SL is a rapid curing, self-levelling screed to level out uneven floors. It creates a seamless smooth base and can be walked on after 2-4 hours. It’s made of strong, durable material that is not hazardous (does not contain Portland cement) and does not shrink or crack. Ideal for warehouses, production zones, aircraft hangers and more.
Rust-Oleum 6570 Basecoat Rapid SL is designed to flatten out rough concrete floors. The product can be applied with a trowel, a rake or a special spreader with triangular teeth. The recommended layer thickness is 8mm, but it is possible to apply the product at a thickness of 5-30mm. Rust-Oleum 6570 Basecoat Rapid SL be used with Rust-Oleum topcoats to provide better aesthetics and improved wear and chemical resistance.
Features & Benefits
- Fast track floor refurbishment
- Strong durable floor topping
- Self levelling and rapid setting
- Walk on after 2-4 hours
- Install floor finishes after 24 hours
- Single pack
- Protein free and will not harbour bacteria
Surface Preparation
Concrete or screed substrate should be a minimum of 25N/mm², free from laitance, dust and other contamination. The substrate should be dry to 75% RH (BS8204) and free from rising damp and ground water pressure. Use Rust-Oleum 5220 Epoxyshield Sealer on porous mineral substrates.
Directions for Use
Add 3.6–3.8 litres of water per 20kg bag and mix mechanically.
Application
Pour the material onto the properly cleaned floor and spread it out evenly with a rake or a trowel. Treat the surface directly after application with the de-aeration roller to release entrapped air and to promote the self-levelling effect. The recommended layer thickness is 8mm, but it is possible to apply the product at a thickness of 5-30mm. Clean tools and spills with (hot) water before the product has started to cure.
Application Conditions
Temperature of air, substrate and coating material between 5 and 25°C. Ensure the screed is not subject to draughts and strong sunlight during the first 24 hours of curing as this may lead to cracking and crazing.
Data sheet
- Touch Dry
- 2-4 Hours
- Brand
- Rust-Oleum
Christopher Wakeford on 2017-09-29 16:41:38 | Question: Can we use this product on a painted concrete floor it is a red high gloss paint with bare bits and unevenness ta |
Answer from Rawlins’ Technical Team: No, the concrete must be bare before application. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum 6570 Basecoat Rapid SL is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT