SikaLevel 20 Levelling Compound
  • SikaLevel 20 Levelling Compound

SikaLevel 20 Levelling Compound

SIK1140

SikaLevel 20 Levelling Compound is a one part, ready to use, protein free, cement based self leveller for floor smoothing and levelling uneven rigid internal floors prior to applying final wearing coverings such as carpets, sheet vinyl, lino, tiles, laminates and timber.

Ideal for the levelling/smoothing of rigid timber, concrete, sand/cement screeds, quarry tiles, terrazzo and ceramic tiles.

Features and Benefits 

  • Smooths and levels from 15mm to featheredge
  • Suitable with underfloor heating
  • Foot traffic after just 2-4 hours @ 20°C
Colour
Size
£16.78
VAT excluded

£20.13 Tax incl.
Quantity

Description

SikaLevel 20 Levelling Compound is a one part, ready to use, protein free, cement based self leveller for floor smoothing and levelling uneven rigid internal floors prior to applying final wearing coverings such as carpets, sheet vinyl, lino, tiles, laminates and timber.

USES

  • Levelling/smoothing of:
  • Rigid timber
  • Concrete
  • Sand/cement screeds (not Anhydrite)
  • Quarry tiles, terrazzo, ceramic tiles
  • Underfloor heating applications beneath heating cables/pipes or on top of heated screeds

Features & Benefits

  • Smooths and levels from 15mm to featheredge
  • Suitable with underfloor heating
  • Foot traffic after just 2-4 hours @ 20°C

For more details please download the product data sheet from the 'DATASHEETS' tab above.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
SIK1140

Data sheet

Manufacturer
Sika
Interior / Exterior Use
Interior
For Use On
Concrete, Ceramic Tiles
Application Method
Trowel, Pump
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Product Certifications
EN 13813
Pack Size
25KG
Coverage
25kg will cover approximately 5m² @ 3mm thickness
Touch Dry
2 - 4 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Stewart on 2019-02-12 16:49:48
Question: 

I am fitting an electric heater mat to a newly laid screed with 6 mm insulation board between them and 150 mm insulation below the base screed. Before fitting the laminate I intend to apply 3 mm of Sika 20 compound. Can the compound go straight onto the heater mat.

Answer: 

SikaLevel 20 Levelling Compound would not be suitable for this application but SCHÖNOX APF would be. You must have a minimum of 6-8mm above the pipe or electric wire. Prime the concrete with SCHÖNOX VD mixed 1:3 with water before laying the wires or screed.

questions Peter on 2019-01-03 20:23:37
Question: 

I am gluing a solid wood floor on a cement screed sub-base. To prepare the floor I have been advised to seal the base with Sika Primer MB. To level the base I am considering using Sika Level 20 levelling compound. Is this the right choice? And importantly, is it compatible with:- (a) the Sika Primer MB? (b) SIka Bond MS Wood Floor Adhesive, to glue a solid wood floor in place. Or is there a better system altogether? Look forward to your response. Peter

Answer: 

We can confirm that this combination of products is suitable to work together. When applying the self levelling compound onto Sika Primer MB, the instructions to broadcast the primer with sand must be adhered to in order to provide a mechanical key. Please refer to product technical data sheets which can be downloaded from the respective product pages.


Question about the product

* Required fields
(read)
Send