Rust-Oleum 5401 Epoxy Impregnation Primer is solvent free and improves adhesion on concrete and other porous, mineral surfaces: Primarily intended for roller and brush application Provides a good key for adhesion on porous, mineral substrates Impregnation of porous and brittle floors Can be applied on slightly damp surfaces Also ideal...
Rust-Oleum 5400 Self Levelling Epoxy
Rust-Oleum 5400 Self Levelling Epoxy is a self levelling, two component epoxy mortar and coating in one for concrete floors:
- Offers outstanding protection against high humidity and moisture, frequent spillage of chemicals, heavy abrasion, impact, heavy pedestrian and vehicular traffic
- Delivers a smooth and seamless finish to concrete floors
Rust-Oleum 5400 Self Levelling Epoxy should be used on cleaned, horizontal concrete floors. It needs to be applied with a rake and/or trowel and de-aeration roller.
This self-levelling epoxy mortar offers outstanding protection against high humidity and moisture, frequent spillage of chemicals, heavy abrasion, impact, heavy pedestrian and vehicular traffic.
Features & Benefits
- Mortar and coating in one
- Application of 2-4 mm in one coat
- No VOC emission and low odour
- Smooth and seamless finish
- Excellent resistance against impact, heavy traffic and chemicals
- Solvent free
- Coating and mortar in one
- Resistant against high humidity, chemicals, abrasion and impact
Rust-Oleum 5400 Self Levelling Epoxy should be applied on substrates primed with Rust-Oleum 5401 Epoxy Impregnation Primer
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- 2m² per KG
- Compressive Strength (at 20°C)
- 96.8 N/mm²
- Tensile Strength
- 14.9 N/mm²
- 1.95 kg/l ± 0.05
- Shelf Life (from date of manufacture)
- 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 16 Hours
|Darren Connor on 08/03/2018|| |
Hi which epoxy floor leveller would you recommend for a workshop floor. The workshop will be used for repairing agricultural machinery, thus wil have to be extremely hard wearing be able to handle fabrication processes, chemicals/oils etc. Also as the workshop doors will be open could you recommend a top coating which won’t fade with sunlight
Rust-Oleum 5400 Self Levelling Epoxy followed by Rust-Oleum 9200 Rust-O-Thane would be our recommendation. If you wish to provide measurements of your floor area we can advise on the quantity of material you would require.
Sikafloor 400 Level is a high quality, dust reduced cement based self levelling compound suitable on all gypsum and cement based substrates in interior areas. Sikafloor 400 Level is noted for its very low shrinkage and is suitable for castor chair rollers. Suitable for filling, smoothing, evening and levelling of substrates under textile, elastic and...
Sikafloor 100 Level is a polymer modified, cementitious floor levelling compound for 1-10mm. Very low emission cement based self-levelling compound suitable for interior areas. Sikafloor 100 Level is characterised by good working properties and is suitable for castor chair rollers according to EN 12 529.
SCHÖNOX FPL PLUS is a self levelling compound for use from 3 to 60mm, with aggregate 60mm. SCHÖNOX FPL PLUS is noted for very little shrinkage. After adding of 4.5 litres water to 25kg of powder, SCHÖNOX FPL PLUS is ready to use. Interior and exterior.
SCHÖNOX LC is a high performance two component latex levelling compound for use from 3 to 60mm, charcterised by low shrinkage. After adding the liquid component (4.75L) to 25kg of the powder component SCHÖNOX LC is ready for use. For interior and exterior use.
SikaLevel 25 Latex Self Levelling Screed is a high performance, floor levelling and fast drying, latex modified cementitious screed for indoor domestic and light commercial use. ADVANTAGES Self-smoothing FluidEasy Ready for use Low shrinkage Fast setting/drying 2-4 hours walk on time (+20°C) Freeze-thaw salt resistance Protein and Formaldehyde...
Remmers Multiplan is a hydraulic, fast setting, self-levelling, floor levelling compound, early loadable or use indoors and outdoors. Ideal for use in residential areas for garages, basements and workshops on concrete and cement screed, for levelling substrates before laying floor covers (tiles, carpeting, parquet, coatings, etc.) on concrete...
SCHÖNOX XA is a very low emission, calcium sulphate based smoothing and levelling compound especially suitable for all calcium sulphate based subfloors as well as mastic asphalt screeds according to EN 13 813. Also for interior use on cementitious subfloors. After adding 6 litres water for 25kg powder, SCHÖNOX XA is ready for use.
Sikafloor 155 WN is a 2-part water based epoxy resin primer. Can be used as a primer and adhesion promoter on properly prepared concrete and cementious screeds, as well as a primer for other Sikafloor products.
Sikagard 720 EpoCem is a 3-part cement and epoxy combination micro mortar for surface sealing. Sikagard 720 EpoCem is a cementitious, thixotropic, fine textured mortar perfect for the levelling and finishing of concrete, mortar or stone surfaces.
Sikafloor Level 30 is a high performance, cementitious, self-levelling and fast drying, cementitious screed for indoor or outdoor use at 4 - 30mm thickness. ADVANTAGES Low shrinkage Fast setting and drying Highly fluid 3-4 hours walk on time (+20°C) Good surface appearance and hardness Excellent freeze-thaw salt resistance Casein and...
SikaLevel 30 Latex Ultra is a high strength rapid setting cement based powder, which when mixed with water, can be used to level out uneven floors and screeds. It may be overlaid with common floor coverings or may be left as a final wearing surface and can be applied in one coat from 2-10mm in depth (25mm when filled).
Sikafloor 300 Rapid Level is a very low emission cement based self levelling compound for almost all substrates suitable for laying. For interior use, Sikafloor 300 Rapid Level is suitable for filling, smoothing and levelling of suitable substrates before applying parquet, ceramic tiles, textile and elastic floor coverings as well as coatings that are...
FasTop Bu (formerly known as Resufil) is a three component, granite reinforced polyurethane infill screed designed to fix holes or dents in a concrete subfloor, before overlaying occurs. It can also back-fill drainage waterways. ADVANTAGES Can be applied from 6mm to 60mm Can back-fill drainage channels Forms falls or ramps Fast curing...
SCHÖNOX AP is a synthetic gypsum self-levelling compound for use from 1 to 45mm, especially suitable on all gypsum substrates as well as on cast asphalt screeds according to DIN 18 560. Can also be used on cement substrates in interior areas. After adding of 6 litres of water to 25kg of powder, SCHÖNOX AP is ready to use.
Sika BentoShield MAX LM is a polymer modified bentonite waterproofing system. Mechanically bonded, contaminate resistant, self healing membrane for basement and below ground structures. Resistant to contaminated soils, forming an automatic mechanical bond to freshly poured concrete it virtually eliminates the possibility of water movement between the...
Sikafloor 81 EpoCem is a three part cement and epoxy combination mortar from Sikafloor for self-smoothing floor screeds of 1.5 to 3mm. Use as a Temporary Moisture Barrier (TMB) or under Epoxy, Polyurethane and PMMA resin floors, over high moisture content substrates, even green concrete.