Tremco SX070 Feather Finish Compound

    350844
    TRE5497

    Tremco SX070 Feather Finish Compound is a rapid drying feather finish compound for interior applications. Ideal for smoothing and repairing the subfloors prior to the installation of a floor covering.

    • Short setting and cure time, facilitating a fast track program and minimising disruption
    • Can be applied over well bonded thin film adhesive residues
    • Can be used to repair ridges and depressions up to 12mm, or to achieve a true feather edge
    • Does not require a primer prior to application
    • Excellent adhesion to a wide range of common flooring substrates, including concrete, sand/cement screeds, plywood, glazed and unglazed floor tiles, etc.
    • Please note: Colours shown are approximate and are for illustrative purposes only
    • Please note this product is subject to a minimum order quantity

    Colour
    Size
    £39.42(ex. VAT)
    £47.30 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    The minimum purchase order quantity for the product is 2.

    Description

    Tremco SX070 Feather Finish Compound is a rapid drying feather finish compound for interior applications. Ideal for smoothing and repairing the subfloors prior to the installation of a floor covering.

    Benefits:

    • Short setting and cure time, facilitating a fast track program and minimising disruption
    • Can be applied over well bonded thin film adhesive residues
    • Can be used to repair ridges and depressions up to 12mm, or to achieve a true feather edge
    • Does not require a primer prior to application
    • Excellent adhesion to a wide range of common flooring substrates, including: concrete, sand/cement screeds, plywood, glazed and unglazed floor tiles, etc.
    • For detailed product information please see the Product Data Sheet

     

    Technical Data:

    PropertyResult
    CompositionA blend of special cements, graded fillers, and modified polymers
    Pot Life20°C: 20 minutes
    Open Time/Workability20°C: 15 minutes
    CoverageAn average thickness of 1mm will give a coverage rate of 14m² per mix. Up to 50m² coverage may be achieved when used as a true feather edge
    Cure Time at 20°C: Floor covering: After 1 hour, Full Traffic: After 24 hours
    StorageStore between +5°C and +30°C in dry shaded conditions
    Shelf Life6 Months from date shown on the bag. See Product Data Sheet for more information.

     

    Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.

    Product Details
    5497-887578

    Data sheet

    Manufacturer
    Tremco
    Interior / Exterior Use
    Interior Use
    For Use On
    Concrete, Sand Screed, Cement Screed, Plywood, Tile
    Application Method
    Trowel, Spiked Roller
    Colour
    Standard / Ready Mixed
    Single, Two or Three Pack
    Single
    Pack Size
    10KG
    Dry to Recoat (at 20°C)
    1 Hour
    Fully Cured (at 20°C)
    24 Hours
    Coverage
    An average thickness of 1mm will give a coverage rate of 14m² per mix. Up to 50m² coverage may be achieved when used as a true feather edge
    UN Number
    N/A
    Layer Thickness
    Feather edge to 12mm
    Drying time
    Walk on hardness time at 20°C 1 hour
    Base Type
    Cement Based
    Suitable For Use On
    Well Bonded Thin Film Adhesive Residues
    Suitable For Use On
    Cement
    Suitable For Use On
    Sand
    Suitable For Use On
    Sand Screeds
    Suitable For Use On
    Unglazed Floor Tiles
    Suitable For Use On
    Concrete
    Suitable For Use On
    Plywood
    Suitable For Use On
    Cement Screeds
    Suitable For Use On
    Glazed Floor Tiles
    Application Method
    Trowel
    Application Method
    Roller
    Usages
    Quick Drying
    Product Usage Type
    Compound
    Colour Family
    Grey
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Tremco SX070 Feather Finish Compound is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT