Formerly HA104, the environmentally friendly alternative to resin-based materials, specifically formulated for the bedding of all access covers.
The environmentally friendly alternative to resin-based materials, specifically formulated for the bedding of all access covers. Envirobed CD534 has been HAPAS Approved since 2005 and conforms to HA104/09. Its superior compressive, tensile and flexural strengths make it ideal for use in heavily trafficked / wheel track locations. It can be open to traffic after just 1 hour.
Envirobed CD534, (part of UltraCrete’s HAPAS Approved Ironwork Reinstatement System), is specifically formulated for the bedding of ductile ironwork conforming to the Highways Agency Design Manual for Roads and Bridges: Mortars for Bedding Ironwork, HA104/09, part 5, clause 6.1 and is particularly suitable for use in wet weather conditions.
With superior compressive, tensile and flexural strengths reached after just 3 hours, Envirobed CD534 provides all the performance but none of the environmental hazards of traditional resinous materials, such as hazardous waste disposal.
Envirobed CD534 is supplied as a two-component system which contains a blend of special cements, polymer graded aggregates and recycled glass. The combined components provide a high performance mortar, which can accommodate depths of 10mm-50mm in one pass. If necessary, greater depths can be achieved by using the layer-upon-layer method.
All surfaces should be free from oil, grease, dust or any other visible contaminants. Remove all loose particles and work on a sound substrate. Pre-soak the area with clean water prior to application to aid bond. Remove ponded water before applying the product.
For more information on preparation and mixing, please see the product data sheet.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Instarmac UltraCrete Envirobed CD534 High Performance Bedding Mortar is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Instarmac UltraCrete Envirobed CD534 Flowable High Performance Bedding Mortar (formerly HA104) is specifically formulated for utility reinstatements. Great for bedding large section manhole covers and frames.BT LN550 and LN320 compliant Conforms to HA104/09 Can be used in the wet Combines as a bedding mortar and backfill Aids lateral...
£2,789.77 (incl. VAT)
£2,324.81 (ex. VAT)
Market leading, rapid strength mortar, for use with all access covers, as well as for the bonding of granite setts, flags and bedding kerbs.HAPAS approved since 2005 Conforms to HD27/15 Rapid strength gain Open to traffic: 60 minutes Shrinkage compensatedMore Information Delivery Info
£1,189.14 (incl. VAT)
£990.95 (ex. VAT)
A fibre modified concrete for backfilling around manhole frames and gullies and can also be used for surface repairs.HAPAS Approved since 2005 Shrinkage compensated Rapid set: 10-20 minutes 20N/mm² compressive Open to traffic: 90 minutes strength after 90 minutesCoverage Calculator
£1,296.20 (incl. VAT)
£1,080.17 (ex. VAT)
10mm grade - For permanent repairs in type 3 & 4 roadsEasy work formula Easier to compact HAPAS Approved since 2002 Instantly trafficable No waste, resealable buckets Easy to apply Depth: 30-100mm Use in all weathers For planned repairsMore Information Delivery Info
£983.52 (incl. VAT)
£819.60 (ex. VAT)
A cold joint sealer that is applied onto vertical edges and surface base before the application of asphalt.HAPAS Approved since 2005 Prevents water ingress Improves bond Prolongs the life of your repair Can be used in all weathers Box of 12 Please note: This product is subject to a minimum order quantity of 5 x Boxes of 12 750ml...
£204.26 (incl. VAT)
£170.22 (ex. VAT)
Designed for the application to asphalt roads to prevent water ingress and progressive fretting.HAPAS Approved since 2012 No waste, cut as required Prolongs the life of your repair Easy to use Fast installation Open to traffic: 10 minutes Box of 12 rolls Please note: This product is subject to a minimum order quantity of 4 x boxes...
£225.50 (incl. VAT)
£187.92 (ex. VAT)
PY4 produces a stiff supporting mortar, and is effective for the rapid installation and reinstatement of manhole covers and frames in heavily trafficked areas.Workability: 5 – 10 minutes Set time: 15 minutes Depth: 5mm – 50mmMore Information Delivery Info
£1,016.56 (incl. VAT)
£847.13 (ex. VAT)
