Instarmac UltraCrete Post Fix Rapid Hardening Concrete
Post Fix is a 10mm concrete formulated for sub-surface use and fast installation of posts, signs, fences, street lighting, speed cameras and road side barriers. This professional grade concrete is fast setting and has an impressive compressive strength of 41N/mm².
Workability: 5 – 10 minutes
Set time - 15 minutes
Two-part mix
Easy mix
Approved for use on London Underground and Overground
Applications
UltraCrete Post Fix is a rapid hardening 10mm concrete formulated for sub-surface use in the fast and efficient installation of posts, signs, fences, telephone and electricity poles, street lighting columns, street furniture, speed cameras and road side barriers.
Technical
Post Fix is supplied as a damp pack in 25kg plastic bags, which contain 2 parts – a 10mm graded aggregate pack and special cement pack. The product requires only the addition of water on site to form a strong quick setting base which holds posts, signs, fences, etc. instantly.
Preparation
Good concrete practice should be observed at all times to enable the mix to be placed into position within 4 minutes of mixing. All surfaces should be free from oil, grease, dust or any other visible contaminants.
Mixing
Post Fix should be mixed by hand or with a freefall mixer. Simply mix the inner bag containing the cement with the aggregate.
Full preparation and mixing instructions can be found on the product data sheet.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Instarmac UltraCrete Post Fix Rapid Hardening Concrete is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
A fibre modified concrete for backfilling around manhole frames and gullies and can also be used for surface repairs.HAPAS Approved since 2005 Shrinkage compensated Rapid set: 10-20 minutes 20N/mm² compressive Open to traffic: 90 minutes strength after 90 minutesCoverage Calculator
Designed for thick section repairs, haunching reinstatements, ironwork backfilling and commerical sign/post installation.HAPAS Approved since 2005 20N/mm² compressive Rapid set: 10-20 minutes strength in 2 hours Open to traffic: 2 hours • Shrinkage compensatedMore Information Delivery Info
Instarmac UltraCrete QC6 Surface Reinstatement Concrete is a non-shrink concrete designed for the surface reinstatement of ‘picture frames’ or fillets around access covers and surface areas around street furniture.Shrinkage compensated Excellent workability Rapid set: 15 minutes BT Approved Anti-vandal Open to traffic: 4 hours...
Instarmac UltraCrete Flowcon Self-Compacting Concrete is a high specification C40 concrete in a bag, ideal for applications with limited site access where bulk concrete cannot be delivered.Easily transportable Flowable Pre-blended cement for a consistent mix High compressive strength 55N/mm² Please note: This product is subject to a...
Instarmac UltraCrete FTC (Fast Track Concrete) is a fibre modified concrete, suitable for small and large reinstatements to car parks, warehouses and bridge decks.Shrinkage compensated High compressive strength 66N/mm² Foot traffic: 2 hours Pre-blended, just add waterMore Information Delivery Info