A rubberised bitumen-based product that makes crack repairs on asphalt and tarmac easy, simply pouring into cracks up to 3mm from a spouted can. Ideal for use in car parks and on walkways, school playgrounds, and more.
Quick to dry - approx. 2-4 hours for cracks up to 3mm
Watco Asphalt Crack Filler is a polymer modified flexible crack filler for asphalt, tarmac, and all bituminous surfaces.
Unsightly cracks in asphalt can lead to water ingress, erosion, and accelerated deterioration of the surface. This rubberised bitumen based product makes crack repairs easy. Simply decant the liquid into a spouted can (e.g. a watering can) and pour into the crack.
Do not use in wet or cold (below 5ºC) conditions. Damp or cold weather will delay the drying time. The crack should be reasonably dry, although a little dampness may be tolerated.
Cracks up to 3mm wide – Pour the Watco Asphalt Crack Filler into the cracks using a spouted can. Alternatively, a watering can may be used.
Brush out to a thin film any surplus liquid which overflows the edges of the crack.
Once the Watco Asphalt Crack Filler has dried, dust with very fine sand or cement to remove any residual tack.
Cracks 3mm - 25mm wide – Prime the sides of the crack with a brush coat of Watco Asphalt Crack Filler. Mix Watco Asphalt Crack Filler with damp sand (Watco Sand Additive is available) to produce a slightly stiff mortar. Trowel into the crack and smooth off. Once the mortar is dry, dust with very fine sand or cement to remove any residual tack.
For Use By
Interior / Exterior Use
Interior and Exterior
Water / Solvent Based
For Use On
For Use On
Single, Two or Three Pack
Designed for use on bitumen based surfaces. It could soften surfaces which contain coal tar. If in doubt, apply a test area and check after 24 hours that no softening has occurred.
5 litres should generally be sufficient for 100m of 5mm wide, 5mm deep crack.
Use water and detergent if the product has not dried. Once dried, use white spirit.
Min. Application Temperature
Approximately 2 - 4 hours should be allowed for cracks up to 3mm 6 -10 hours for cracks up to 25mm
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
A unique formulation which provides superior wear performance for marking out parking bays, pedestrian walkways, hazardous areas, tennis courts.
Areas of use include:
Marking out parking bays and pedestrian walkways
Colour coding and highlighting hazardous areas
Playgrounds, tennis courts, driveways
Can be applied to damp surfaces...
Get old tarmac and asphalt looking as good as new with just a single coat of Watco Black Top. Ideal for car parks, driveways, school playgrounds, and more.
Avoids costly resurfacing and extends the life of asphalt
Covers old stains and worn line markings, dramatically improving appearance
Cures in as little as 2-5 hours
Increases viscosity of Watco Roofite products for thicker application to larger cracks in roofs.
Part of the Roofite range - a range of products to repair, protect and waterproof roofs
Silica sand to mix with Roofite for cracks greater than 3mm
Produces a trowellable repair compound
For exterior use
More Information Delivery Info