Britannia Aquashield Eco Smooth
    • Britannia Aquashield Eco Smooth
    • Britannia Aquashield Eco Smooth
    • Britannia Aquashield Eco Smooth
    • Britannia Aquashield Eco Smooth
    • Britannia Aquashield Eco Smooth

    Britannia Aquashield Smooth

    WPRC
    BRI3087

    A solvent-based, ready to use product for waterproofing flat roofs, pitched roofs, weathered asphalt and bituminous surfaces, gutters, concrete, brickwork, fibreglass, felt and metal (galvanised and ferrous), instantly. 

    • Particularly suitable for general maintenance work 
    • Smooth coat recommended for easy-flow application 
    • Rainfall immediately after application has no adverse effect 

    Colour
    Size
    £108.49(ex. VAT)
    £130.19 (inc. VAT)
    Quantity
    Please choose your colour
    In Stock and Available for Delivery (See Delivery Options Below)

    Description

    Britannia Aquashield Smooth is a single-pack waterproofing coating for flat roofs, pitched roofs, weathered asphalt and bituminous surfaces, gutters, concrete, brickwork, fibreglass, felt and metal (galvanised and ferrous).

    The smooth finish means that this coating can be applied by roller, brush or squeegee.

    It works instantly, and rainfall immediately after application has no adverse effect on the waterproofing capabilities of the product.



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • One-pack product
    • Solvent-based
    • External use only
    • Works instantly
    • Particularly suitable for general maintenance work
    • Smooth coat recommended for easy-flow application
    • Can be brush, roller or squeegee applied
    • Rainfall immediately after application has no adverse effect
    • Ready for use on flat roofs, pitched roofs, weathered asphalt and bituminous surfaces, gutters, concrete, brickwork, fibreglass, felt and metal (galvanised and ferrous)



    Spreading Rate


    These will vary depending on substrate, the site conditions and longevity required.

    Typically spreading rates will vary depending on the end use.

    • Standard Coat - Approximately 1 kg per square metre dependent on substrate
    • High Build Coat - Between 1 kg – 2 kg per square metre dependent on substrate



    Drying Times


    • Up to 6-7 days depending on temperature, thickness of coating
    • The product may remain slightly soft for a further period depending on climatic conditions, this is not detrimental to the waterproofing qualities of the product



    Preparation


    Dirt build up, moss and loose material should be removed by scraping or brushing. In cold conditions any ice present on the surface must be removed.

    • Most roofing substrates to be treated will not normally require priming
    • Application Temperature should be between 5°C-25°C

    Highly Porous/Friable Surfaces:

    • Concrete, Concrete and Asbestos Cladding, Sheeting and Guttering should be primed with Britannia Aquashield Primer (see separate technical sheet) prior to over coating with Britannia Aquashield Smooth Waterproof Roof Coating
    • These Surfaces must be jet washed prior to applying the Britannia Aquashield Primer
    • Fibrous cement, corrugated cladding, sheeting and guttering: other than repairs, we recommend the use of Durashield for this application

    Metal Surfaces:

    • Ferrous-new, weathered and previously painted galvanised iron and steel
    • All these areas should be suitably prepared and primed as appropriate (see separate technical sheet) before application of Britannia Aquashield Smooth Waterproof Roof Coating

    Non-Porous Substrates:

    • Slate, Polished bricks should be power washed abraded and completely dry, free from any contamination to achieve adhesion of the Britannia Aquashield Smooth Waterproof Roof Coating

    Bitumen Surfaces:

    • Discolouration may occur over a new asphalt, tar or bitumen surface; therefore an extra coat may be required, for decorative purposes only
    • Aged bitumen can be liable to crack, therefore further advice must be taken

    Previously Painted Or Coated Substrates:

    • It is good practice to inspect and carry out adhesion tests on any existing coating or substrate prior to application of the coating

    Splits, Cracks, Joints and Seals, Crazed Areas:

    • Pay particular attention to clean out any splits/cracks/joints and seals by scraping or brushing off with a stiff bristle brush before applying the Britannia Aquashield Primer
    • Repair all faults in the surface by either Britannia’s Reinforcing Scrim in the first of two coats or using a proprietary sealer

    Surface Faults:

    In areas where excessive movement may occur, additional reinforcement must be incorporated into the coating.



    Application


    • To the dry and cleaned surface, apply a generous coat of Britannia Aquashield Smooth Waterproof Roof Coating by brush, roller or squeegee, at the minimum specified spreading rate as stated above under the heading
    • Please follow the coverage rates shown in Spreading Rate Section
    • Application Temperature should be between 5°C-25°C



    Cleaning


    • For cleaning equipment use Special Solvent (Not White Spirit)



    Shelf Life & Storage


    • Up to 2 years if stored correctly in an unopened container



    Precautions


    • Flammable keep away from sources of ignition
    • Ensure good ventilation during application
    • Over occupied premises during insulation of coatings we would advise keeping windows closed
    • Wear gloves, goggles and suitable protective clothing
    • In case of contact with eyes rinse immediately with plenty of water and seek medical advice
    • Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water
    • Keep out of reach of children
    • Do not use near fishponds
    • Toxic to aquatic organisms
    • May cause long term adverse effects in the aquatic environments
    • Do not empty into drains



    Product Details
    3087-453007

    Data sheet

    Manufacturer
    Britannia
    Interior / Exterior Use
    Exterior Use
    Water / Solvent Based
    Solvent
    For Use On
    Concrete, Bitumen, Fibreglass, Brickwork, Metal
    Application Method
    Brush, Roller, Squeegee
    Colour
    Standard / Ready Mixed
    Single, Two or Three Pack
    Single
    Pack Size
    1KG, 2.5KG, 5KG, 20KG
    UN Number
    UN1263
    Base Type
    Solvent-Based
    Suitable For Use On
    Metal
    Suitable For Use On
    Brick
    Suitable For Use On
    Bitumen
    Suitable For Use On
    Concrete
    Suitable For Use On
    Fibreglass
    Application Method
    Brush
    Application Method
    Squeegee
    Application Method
    Roller
    Usages
    Solar Reflective
    Usages
    Waterproofing
    Product Usage Type
    Topcoat
    Product Range
    Aquashield
    Fastest Delivery
    Next Working Day
    Colour Family
    Clear
    Colour Family
    Grey
    Roof Type
    Flat & Pitched
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    questions Jon on 2023-06-20 15:52:01
    Question: 

    Is this a suitable coating for a felt flat roof? It has previously had an aluminium solar reflective paint applied but this is starting to flake off in areas so looking for something a bit more hardwearing.

    Answer from Rawlins’ Technical Team: 

    This product can be applied to a felt roof assuming it is clean, dry and sound.

    If it has been previously painted we would recommend to test on a small area for compatibility and adhesion prior to full application.

    questions Paul Ingram on 2023-04-13 11:39:50
    Question: 

    Is Aquashield smooth solvent based material suitable for repairing leaks to Sanafil plastic roof sheeting, including suspect gaps around upstands/flashings etc? What size cans are available, from where and what is the approx coverage? Thank you.

    Answer from Rawlins’ Technical Team: 

    Unfortunately no, this product is not suitable to be applied to a single ply membrane roof. 

    GacoPro Roof Coating can be applied to most single ply membranes, we would recommend to test on a small area for compatibility and adhesion prior to full application. 

    Please note this is not designed to fill gaps around upstands or flashings, this should be address prior to application with Gaco Liquid Roof Tape

    questions Thomas on 2023-03-01 15:14:21
    Question: 

    Can this paint be used to cover Fleece Butyl tape.On a asbestos garage roof.

    Answer from Rawlins’ Technical Team: 

    Unfortunately no, for this application assuming the asbestos roof is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Britannia Durashield FD Primer followed by Britannia Durashield

    This is suitable for application to asbestos and will be compatible with the fleece butyl tape.

    questions Louise O'Donnell on 2020-04-11 08:42:30
    Question: 

    Can this paint be used on rubber window seals on a bus.if not can you suggest a product.

    Answer from Rawlins’ Technical Team: 

    No, this product would not be suitable for this application.

    questions richard on 2020-03-31 11:35:55
    Question: 

    hi what is the coverage?

    Answer from Rawlins’ Technical Team: 

    The coverage is 1-2kg per m² dependant on the substrate.

    This information can be found on the Technical Data Sheet in the Attachment tab on the product link below.

    Britannia Aquashield Smooth

    questions Peter on 2019-12-12 17:47:35
    Question: 

    Following up on a question by Maurice on 22/10/2019, I also wish to use Aquasheild Smooth on Onduline Bitumous roofing sheets, but as these sheets are red I will use the Clear Aquashield product. You recommend using Aquashield Primer first, but is this also clear?

    Answer from Rawlins’ Technical Team: 

    The primer is white so unfortunately a clear option to try an retain the look of the current red colour will not be possible.

    questions Ron Bottomley on 2019-11-09 14:33:34
    Question: 

    could this help seal between a outside brick wall and concrete patio area? Thank you

    Answer from Rawlins’ Technical Team: 

    Its not clear what is required here but it may be more suited to something like Bullet Mega Mastic.

    questions Terry Groves on 2019-10-23 14:27:51
    Question: 

    Can I seal a canvas caravan roof with this. I wish to make the seal permanent even if it gives a different finish and look.

    Answer from Rawlins’ Technical Team: 

    Britannia Aquashield Smooth would not be suitable for this application.

    questions Maurice jenkins on 2019-10-22 11:47:32
    Question: 

    Can this be used on old ondulin

    Answer from Rawlins’ Technical Team: 

    Assuming you are referring to bituminous corrugated roofing sheets then yes, Britannia Aquashield Smooth would be suitable for application to this type of surface however we would recommend first priming with Britannia Aquashield Primer. We would NOT recommend application of the Aquashield system to Onduline PVC clear sheets however. Depending on the current condition of the roof in question and what you wish to achieve it may be advisable to discuss your project with our Technical Team on 0113 2455450 (option 2).

    questions Michael Tyers on 2019-09-10 15:15:35
    Question: 

    Can this product be used to freshen up car mud flaps. Thanks.

    Answer from Rawlins’ Technical Team: 

    No.

    questions graham bishop on 2019-08-27 10:47:59
    Question: 

    can this product be used to seal a leak in a pond if not can you recommend a produc

    Answer from Rawlins’ Technical Team: 

    No, Britannia Aquashield Smooth cannot be used for this application. To discuss alternatives please contact our Technical Team on 0113 2455450 (option 2).

    questions tony tyler on 2019-08-23 11:13:06
    Question: 

    does this product set hard or semi malleable? I am trying to find a product to seal a 1960s fibre glass egg chair,

    Answer from Rawlins’ Technical Team: 

    Britannia Aquashield Smooth is not suitable to be applied to furniture, for this we would instead recommend Rust-Oleum 3333 Super Adhesion Primer followed by Rust-O-Thane 9200 Handy Pack.

    questions Matt Taylor on 2019-07-12 13:37:37
    Question: 

    Hi, could this product be used on a plastered wall in a wetroom? It's to the side of the tiled area so it's not submerged just getting splashed when the shower is used. Regards Matt Taylor

    Answer from Rawlins’ Technical Team: 

    No this would not be suitable for this application. If it is just occassional splashes of water, something like Zinsser Perma-White Interior would be more suited.

      

    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Britannia Aquashield Smooth is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Britannia Aquashield Primer

    Britannia Aquashield Primer is a solvent based primer for very porous and loose/friable surfaces. It ensures the Aquashield topcoat delivers optimum waterproofing performance.Works instantly Vital stabilisation of highly friable/porous surfaces Rainfall immediately after application has no adverse effect Can be brush, roller or spray...

    Price £34.78 (ex. VAT)
    In Stock and Available for Delivery

    Britannia Reinforcing Scrim

    Britannia Reinforcing Scrim is a polyester-based mesh that can be used to reinforce the following: roof fixings, cracks, splits, holes and joints in asbestos gutters and sheeting, rooflights, metal, bituminous felts/coatings and asphalt surfaces, felted surfaces, single ply and fibreglass roofs and wood.Used as a reinforcement with...

    Price £33.83 (ex. VAT)
    In Stock and Available for Delivery