Eagle Ultraflex Waterproof Roof Coating

UDG

Ultraflex Waterproof Roof Coating, a high-performance waterproofing system that can be used all year round on new and existing roofs, walkways, balconies, gutters, etc, with excellent adhesion to a variety of substrates, forming a seamless membrane that is fully cured and trafficable after 24 hours.

  • Ready to use straight out of the tin - application with a solvent resistant roller
  • Excellent adhesion to different substrates: plywood, bitumen membranes, asphalt, metals, brick, concrete, wood etc
  • Use fully reinforced with Ultraflex Matting to ensure easy ‘wet on wet’ application
  • BBA certified for life in excess of 25 years
  • NHBC and Green Roof Approval


Shipping Options (Select at Checkout):

Economy Shipping (10-14 Working Days): £10 +VAT
Express Shipping (2-3 Working Days): £55 +VAT

Colour
Size
£120.00
VAT excluded

£144.00 Tax incl.
Quantity

Description

Ultraflex Waterproof Roof Coating is a high performance waterproofing system for use on new and existing roofs, walkways, balconies, gutters, etc, applying straight from the tin with a solvent-resistant roller, and drying in 2-8 hours (depending on the weather). Surfaces are fully trafficable once fully cured after 24 hours, with Ultraflex forming a seamless membrane on installation.

The coating system has excellent adhesion to a variety of substrates, including plywood, bitumen membranes, asphalt, metals, brick, concrete and wood, combining with Ultraflex Matting to ensure easy wet-on-wet application. Ultratop topcoat can be applied no later than 48 hours after Ultraflex for a glossy finish and extended guarantee - see the relevant product data sheets and application guides for more information, or give our technical team a call on 0113 2455450.

Ultraflex Waterproof Roof Coating is BBA certified for life in excess of 25 years and has NHBC and Green Roof Approval.



Features


  • Ready to use straight out of the tin - application with a solvent resistant roller
  • Use on new or existing roofs, walkways, balconies, gutters etc
  • Excellent adhesion to different substrates: plywood, bitumen membranes, asphalt, metals, brick, concrete, wood etc
    • Fresh concrete must be cured for 28 days
    • On EPDM and TPO it is recommended to install patch test to check compatibility
  • Can be used all year round – moisture curing
  • Use fully reinforced with Ultraflex matting to ensure easy ‘wet on wet’ application
    • Instantly rain resistant once the matting is encapsulated
  • Fully trafficable when cured
  • Once installed, forms a seamless membrane
  • BBA certified for life in excess of 25 years
  • NHBC and Green Roof Approval
  • Do not use silicone sealants. Always use PU based mastics



Preparation


Stir before use.

Apply when ambient temperature is minimum of 2 degrees and rising and not exceeding 30°C.

Ensure substrate is in good condition, dry, clean and free from dust, moss or lichen.

All edge trims to be fixed to substrate prior to application of Ultraflex.

Ultraflex is self-terminating, if brickwork is in good condition, strike a line using tape on the brickwork to coat up to (important: when the Ultraflex has been installed ensure the tape is pulled before the Ultraflex is dry). If the brickwork is in poor condition a termination bar or flashing is required.



Application


Open tin and mix thoroughly before using.

Apply Ultraflex straight out of the can onto the substrate using a solvent resistant roller. Dry roll Ultraflex Matting into the product until the Ultraflex is drawn through, then immediately apply another coat of Ultraflex ensuring the matting is fully embedded avoiding any pinholes.

It is advised to start at the perimeter of the area including upstands to a minimum of 150mm (if possible), ensuring the matting overlaps any trims (including fixings) / joints / change of material by 50mm.

Infill the remaining field area using the same method as above using Ultraflex matting, at a minimum coverage rate of 1.5kg per m². The whole area including trims must be coated to form a continuous seamless membrane. Please take time to make sure no pin holes exist.

Optional: Apply an optional layer of Ultratop topcoat for glossy finish and extended guarantee once the ultraflex is fully cured and no later than 48 hours after Ultraflex application.



Drying Times


Drying time will be approx. 2-8 hours depending on weather, fully cured in 24 hours.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
UDG

Data sheet

Manufacturer
Eagle
For Use On
Plywood, Metal, Concrete, Brick, Wood
Application Method
Roller
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
15KG
Application
Roller
Touch Dry
2-8 hours
UN Number
UN1139
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions David Morris on 2019-08-19 13:08:06
Question: 

Can this product be used without the matting or is the matting an integral part of the system?

Answer: 

We would need some details on your project and requirements to be able to advise. Could you contact our Technical Team at your convenience on [email protected] or 0113 2455450 (option 2).


Question about the product

* Required fields
(read)
Send
You might also like

Eagle Ultraflex Matting

Use Ultraflex Matting in combination with Ultraflex Waterproof Roof Coating systems for wet-on-wet applications. Available on 60m x 1m and 20m x 1m rolls. Shipping Options (Select at Checkout): Economy Shipping (10-14 Working Days): £10 +VAT Express Shipping (2-3 Working Days): £55 +VAT

Price £34.84
In stock