Waterproofing Protection for Flat and Pitched Roofs, Roof Lights, Flashings, Fibre Cement Sheeting, Gutters, Slate, Asphalt, Lead, Metal and Roofing Felt (Primed).

Cromar Cromapol Acrylic Roof Coating is a fibre free liquid acrylic resin dispersed in solvent designed to prevent the ingress of water.

Also available in a fibre-reinforced formula (Mid-Grey, Black, White), which will bridge small gaps and requires only a one coat application to give instant waterproofing.

Quick Links - Click To Jump To Section:

• Features & Benefits
• Application
• Drying Time
• Coverage
• Shelf Life
• Storage Conditions
• VOC Details
• Limitations

Features & Benefits

• Excellent Adhesion
• No Wash‐off
• Excellent Solar Reflectivity (White & Grey)
• Fully Flexible
• Economical
• Fibre free liquid acrylic resin
• Designed to prevent the ingress of water

Application

• Clean all debris to ensure a dust free surface. All moss and lichen must be removed using AlphaChem Fungicidal Wash, ensuring all corners and gutters are clean and free from plant growth.
• Ensure the area to be repaired is free from standing water, make good all cracks, splits, small holes and flashings prior to application. Gap or expansion joints greater than 3mm must be covered using Glass‐Fibre scrim and Cromapol. This must be carried out prior to full coating.
• Cromapol will tolerate damp surfaces although as with any application for best results Cromar recommend applying to a dry surface.
• Cromapol is easily applied using a brush, roller or squeegee.
• These application instructions are for guidance only and do not constitute any warranty of product performance.
• Comprehensive application instructions relating to specific surfaces and uses may be obtained on application to Cromar Building Products.
• Whilst every endeavour has been made to ensure that this information is reliable, we cannot accept any liability for loss, injury or damage which may result from its use.
• Application temperature should be between 5℃ ‐ 25℃.

Drying Time

Drying time up to 1 week depending on temperature and thickness of coating. The product maybe soft for a further period but this is not detrimental to the waterproofing qualities of the product.

Coverage

1 – 2 kg per m² on average.

40°C flashpoint.

Shelf Life

12 months in undamaged, tightly sealed containers.

Storage Conditions

Cromapol should be stored indoors between 5°C ‐ 20°C away from sources of ignition and naked flames etc. Store away from children.

VOC Details

EU Limit for this product CAT. 2(i) : 500g/l (2010). This product contains max. 459 g/l VOC’s.

Limitations

• Cromar strongly recommends inspecting the surface and carrying out adhesion tests to any existing coating or substrate prior to the application.
• Not for use in areas where solvent or oil contact is likely, or on walkways, balconies, timber and new concrete.
• It is the users responsibilty to determine suitability for use. If in doubt please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected]
• N.B. Slight oily separation may occur in unopened containers over 8 months old. This is normal, is easily stirred back into the product, and in no way affects its performance.
• It is the user’s responsibility to ensure suitability for use. Safety Data available on request.
• Read the label carefully for essential health and safety information prior to use.