Illbruck SP540 Floor Joint Sealant

341213 341208 397313
ILL5618

Illbruck SP540 Floor Joint Sealant is a one-part, non-sagging, elastic sealant based on hybrid-polymers. Suitable for use in both indoor and outdoor applications.

  • Available in Grey and Black in 310ml Cartridges (Box Of 12), and in Grey only in 600ml Sausages (Box Of 20)
  • Isocyanate and silicone free
  • Fast curing
  • Fast tack-free time
  • Permanent elasticity
  • High mechanical strength and good abrasion resistance
  • Excellent resistance to weathering, aging and UV exposure
  • Floor joints in pedestrian walkways, warehouses, parking areas
  • Time for film formation approximately 35 to 40 minutes
  • Chemically neutral, non-corrosive and low odour
  • EC1 Certified
  • Please note: Colours shown are approximate and are for illustrative purposes only
  • Please note - Black 310ml Cartridges (Box Of 12) and Grey 310ml Cartridges (Box Of 12) are subject to minimum order quantities

**Available for delivery - see Delivery Options below**

Colour
Item
£79.25(ex. VAT)
£95.09 (inc. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

The minimum purchase order quantity for the product is 2.

Description

Illbruck SP540 Floor Joint Sealant SP540 is a one-part, non-sagging, elastic sealant based on hybrid-polymers. Suitable for use in both indoor and outdoor applications.

 

Usage/Purpose:

SP540 is an elastic hybrid sealant for floor joints in pedestrian walkways, warehouses, parking areas. SP540 can be used in both indoor and outdoor applications.

During and after curing, SP540 is chemically neutral and low odour. After total curing the product is permanently elastic while still maintaining a high mechanical strength.

The time for film formation is approximately 35 to 40 minutes. During and after curing, SP540 is chemically neutral, non-corrosive and low odour. After total curing the product is permanently elastic while still maintaining a high mechanical strength. SP540 shows a good resistance to UV light, weather and ageing. The product is free of isocyanates and silicone.

 

Benefits:

  • Isocyanate & silicone free
  • Fast curing
  • Fast tack-free time
  • Permanent elasticity
  • High mechanical strength and good abrasion resistance
  • Excellent resistance to weathering, aging and UV exposure
  • For detailed product information please see the Product Data Sheet

 

Usage Guidelines:

  • Joint faces should be clean of dust and free from substances likely to impair adhesion
  • Loose friable material must be removed and arrisses made good
  • Remove loose particles on concrete and plaster joints using a brush
  • Metal surfaces should be degreased with solvent
  • For a neat finish use masking tape for the joint edges
  • It is recommended that preliminary tests are carried out

 

Technical Data:

Property Result
Specific Gravity 1.5
Consistency Non-sagging
Skin Forming Time ~ 35-40 minutes
Cure Rate Maximum 3 mm in first 24 hours
CE Classification Part 1: F-EXT-INT-CC, Part 4: PWEXT- INT-CC
Shrinkage (by Volume) 3%
Modulus at 100% Elongation ~ 1.0 N/mm²
Tensile Strength ~ 1.7 N/mm²
Elongation at Break ~ 300%
Shore A Hardness 35
Movement Capability 25%
Application Temperature +5°C to +40°C
Service Temperature -40°C to +90°C
Storage Store in dry conditions between +5°C and +25°C
Shelf Life 12 months when stored as recommended in original unopened containers

 

Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.

Product Details
341208

Data sheet

Manufacturer
Illbruck
Interior / Exterior Use
Interior and Exterior
For Use On
Concrete, Plaster
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Product Certifications
EC1
Pack Size
310ml (Box Of 12), 600ml Sausages (Box of 20)
Tensile Strength
~ 1.7 N/mm²
Max. Application Temperature
40°C
Min. Application Temperature
5°C
Shelf Life (from date of manufacture)
12 months
UN Number
N/A
Specific Gravity
1.5
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Illbruck Skeleton Cartridge Gun 380ml

Illbruck Skeleton Cartridge Gun 380ml is a cost-effective applicator gun which can be used with the range of Tremco/Illbruck cartridge products. Economical Easy to use Ideal for use with standard cartridge products Please note this product is subject to a minimum order quantity More Information Delivery Info **Available for delivery...

Price £6.41 (ex. VAT)
In Stock and Available for Delivery