Alternatively you can email our sales & support team on [email protected]
Sika CarboDur S Type
5712
Sika CarboDur S Type plates are pultruded carbon fibre reinforced polymer (CFRP) laminates designed for strengthening concrete, timber and masonry structures as part of the Sika CarboDur System. Sika CarboDur plates are bonded onto the structure as externally bonded reinforcement using Sikadur 30 structural adhesive.
Sika CarboDur S Type plates are pultruded carbon fibre reinforced polymer (CFRP) laminates designed for strengthening concrete, timber and masonry structures. Sika CarboDur plates are bonded onto the structure as externally bonded reinforcement using Sikadur 30 structural adhesive (for details on the adhesive see the relevant Product Data Sheet).
To strengthen structures for:
Load Increase
Increasing the capacity of floor slabs and beams
Increasing the capacity of bridges to accommodate increase axle loads
Installation of heavier machinery
Stabilising vibrating structures
Changes of building use
Damage to Structural Elements
Deterioration of original construction materials
Steel reinforcement corrosion
Vehicle impact
Fire
Earthquakes
Service Improvements
Reduced deflection (Excessive deflection use Sika CarboDur post tensioned system with end anchors)
Stress reduction in steel reinforcement
Crack width reduction
Reduced fatigue
Change in Structural System
Removal of walls or columns
Removal of slab sections for openings
Change of Specification
Earthquakes
Changed design philosophy
Design or Construction Defects
Insufficient / inadequate reinforcement
Insufficient / inadequate structural depth
Features & Benefits
Non corrosive
Very high strength
Excellent durability
Lightweight
Unlimited lengths, no joints required
Low overall thickness, can be coated
Easy transportation (rolls)
Simple plate intersections or crossings
Very easy to install, especially overhead
Outstanding fatigue resistance
Minimal preparation of plate, applicable in several layers
Combinations of high strength and modulus of elasticity available
High alkali resistance
Clean edges without exposed fibres thanks to the pultrusion process
Approvals from many countries worldwide
Cold temperature application possible with Sika CarboHeater
Service temperature upto +80°C possible with Sika CarboHeater
Type
Width
Thickness
Cross Sectional Area
Sika CarboDur S512
50mm
1.2mm
60mm²
Sika CarboDur S812
80mm
1.2mm
96mm²
Sika CarboDur S1012
100mm
1.2mm
120mm²
Sika CarboDur S1512
150mm
1.2mm
180mm²
Sika CarboDur S626
65mm
2.4mm
156mm²
Other sizes are available to order to order, minimum quantities and lead times apply.
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Sika CarboDur E plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber, masonry, steel and fibre reinforced polymer structures.
They are bonded onto the structure as externally bonded reinforcement using Sikadur 30 adhesive. Refer to the relevant Product Data Sheet for more detailed...
Sika MonoTop 612 is an R4 hand placed/wet spray repair microconcrete. Sika MonoTop 612 is a cement-based, one component low permeability repair microconcrete, containing silica fume and polymer, meeting the requirements of Class R4 of BS EN 1504-3.
Features and Benefits:
Pre bagged for quality
Compatible with Sika FerroGard corrosion...
Sikadur 31 DW is a thixotropic, two part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated to meet the requirements for use in contact with drinking water.
Features and Benefits
Can be used in drinking water areas
Easy to mix and apply
Suitable for dry and damp concrete surfaces...
Sikadur 52 Injection Type N is a two part, solvent-free, low viscosity injection liquid, based on high strength epoxy resin. Type N (= Normal Potlife) is used for substrate temperatures between +5°C and +30°C (UK). Used as an injection resin with good adhesion to concrete, mortar, stone, steel and wood.
Features & Benefits...
Sika Galvashield CC embedded galvanic anodes are used to control ongoing corrosion and to prevent the new formation of corrosion sites on reinforced concrete structures. The specially formulated precast cementitious mortar surrounds and activates the sacrificial zinc core. The cylinders are available in a variety of sizes and are quickly and...
Sika L2 High Flow is a one part, high flow, rapid strength cementitious grout which meets the requirements of BS EN 1504-6.
Used for precision, high performance, grouting underneath machine bases, structural steelwork, etc. For grouting precast concrete units and anchor bars, repairing concrete structures, filling voids, for grouting...
Sikadur 31 DW Rapid is a solvent-free, thixotropic, two part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated to meet the requirements for use in contact with drinking water.
Features and Benefits
Can be used in drinking water areas
Easy to mix and apply
Very good adhesion to...
SikaWrap 930 G is a woven unidirectional glass fibre fabric, designed for structural strengthening applications as part of the Sika strengthening system.
Designed for installation using the wet application process and is used for structural strengthening of reinforced concrete, masonry, brickwork and timber elements or structures, to increase...
Sika CarboDur S NSM are pultruded carbon fibre plates for structural strengthening as part of a Sika CarboDur system. Sika CarboDur plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber and masonry Sika CarboDur plates are bonded into slots as near surface mounted reinforcement using...
Sika AnchorFix 1 N is a fast curing polyester anchoring adhesive for use by experienced professionals only.
Standard guns can be used, can be used at low temperatures, ETA to ETAG 029 for anchoring in masonry, non-sag, styrene-free, low odour, low wastage. Used as a fast curing anchoring adhesive for all grades of rebars/reinforcing steel,...
Sika MaxTack Pro-50 Grip 'n' Grab is a multi-purpose, solvent based, trade strength adhesive that can be used for interior and exterior applications.
It can be used in a multitude of applications from bonding skirting to fixing wall cladding, parquet flooring, sockets and decorative frames.
Features and Benefits
Trade strength performance...
Sika FerroGard 903+ is a surface applied mixed corrosion inhibitor, designed for use as an impregnation of steel reinforced concrete.
Features and Benefits
Complies to principle 11 of EN 1504-9 method 11.3 (applying inhibitor to the concrete)
Does not change the appearance of the concrete structure
Does not alter the water vapour...
SikaCem 133S Gunite (formerly SikaCem 133 Gunite) is a cement based, polymer modified one component repair mortar containing silica fume and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3. Formulated for machine applications using the dry process without set accelerators, repairs may be profiled and...
Sika ViscoBond is a concentrated liquid admixture designed for use as a bonding agent with cement-based products in interior or exterior applications.
It is also designed to improve cement based mortars and concretes to waterproof them, enhance their workability and increase their tensile, flexural and bond strengths.
The product conforms to...
SikaCem 133CP Gunite (formerly Sikacrete CP) is cement based one component repair mortar containing limestone aggregate and meeting the requirements of Class R4 of BS EN 1504-3. Formulated for machine applications using the dry process without set accelerators. Repairs and overlay may be profiled and trowel finished where necessary.
Features...
Sika MaxTack Instant Grab SF is a high strength solvent free gap filling adhesive that provides a quick “grab” and replaces mechanical fixings in a multitude of Home Improvement applications, both internally and externally.
The product has exceptionally quick drying properties for a solvent free adhesive achieving over 50% of its ultimate...
