SikaWrap 600 C is a woven unidirectional carbon fibre fabric, designed for structural strengthening applications as part of the Sika strengthening system. SikaWrap 600 C is a unidirectional woven heavy carbon fibre fabric with mid-range strength, designed for installation using the wet application process.
Sika CarboDur S NSM
Sika CarboDur S NSM are pultruded carbon fibre plates for structural strengthening as part of a Sika CarboDur system. Sika CarboDur plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber and masonry Sika CarboDur plates are bonded into slots as near surface mounted reinforcement using Sikadur epoxy resin based adhesives.
Sika CarboDur S NSM are pultruded carbon fibre plates for structural strengthening as part of a Sika CarboDur system. Sika CarboDur plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber and masonry Sika CarboDur plates are bonded into slots as near surface mounted reinforcement using Sikadur 330 or Sikadur 30 epoxy resin based adhesives for normal application temperatures during application. Sikadur 300 epoxy resin based adhesive is used for horizontal applications. Refer to the relevant Product Data Sheet for more detailed information about each of these adhesives.
Sika CarboDur systems are used to improve, increase or repair the performance and resistance of structures for:
Increased Load Carrying Capacity:
- Increasing the load capacity of floor slabs, beams and bridge sections
- For the installation of heavier machinery
- To stabilise vibrating structures
- For changes in building use
Damage to structural elements due to:
- Deterioration of the original construction materials
- Steel reinforcement corrosion
- Accidents (Vehicle impact, earthquakes, fire)
Improvement of serviceability and durability:
- Reduced deflection and crack width
- Stress reduction in the steel reinforcement
- Improved fatigue resistance
Change of the structural system:
- Removal of walls and / or columns
- Removal of floor and wall sections to create access / openings
Resistance to possible events:
- Increased resistance to earthquakes, impact or explosion etc.
To repair design or construction defects such as:
- Insufficient / inadequate reinforcement
- Insufficient / inadequate structural depth
Features & Benefits
- Non corroding
- Very high strength
- Excellent durability and fatigue resistance
- Unlimited lengths, no joints required
- Easy transportation (rolls)
- Lightweight, very easy to install
- Minimum preparation of plate
- Smooth edges without exposed fibres as result of production by pultrusion
- Extensive Testing and Approvals available from many countries worldwide
This product is Made to Order and prices are on application, supplied in non-returnable rolls of 100 or 250m.
|Type||Width||Thickness||Cross Sectional Area|
|Sika CarboDur S1.030||10mm||3mm||30mm²|
|Sika CarboDur S1.525||15mm||2.5mm||37.5mm²|
|Sika CarboDur S2.025||20mm||2.5mm||50mm²|
|Sika CarboDur S212||20mm||1.2mm||24mm²|
|Sika CarboDur S214||20mm||1.4mm||28mm²|
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Sika 2 Water Plug is a rapid setting, leak stopping solution that is ready to use even on high waterpressure areas. It can be used to seal against high water pressure infiltrations and allows Sika 1 Waterproofing Renders, SikaCem 133 Gunite or Shotcrete to be applied on structures exposed to running surface water.
Sikaflex Tank N (available in packs of 20x 600cc sausages) is a 1-part elastic sealant for joints exposed to chemicals used in areas for the storage, filling and handling of water polluting liquids such as: Floor joints in petrol stations, joints in handling areas, storage tanks and containment bunds, etc. Image already added
Sika Galvashield XP Galvanic Anodes are used in concrete rehabilitation to prevent the formation of new corrosion sites adjacent to completed patch repairs. The anodes quickly and easily fasten to the exposed reinforcing steel. Once installed, the zinc core corrodes preferentially to the surrounding rebar, thereby providing galvanic corrosion prevention...
Sika Multi-Stick based on hybrid polymer technology is the ultimate building adhesive, the first hybrid polymer grab adhesive especially created for the Trade, uniquely packed in a plastic 350ml cartridge. This superior adhesive has the ability to bond virtually anything to everything in both wet and dry conditions, and even underwater or in the rain.
Sika ViscoBond is a concentrated liquid admixture designed for use as a bonding agent with cement-based products in interior or exterior applications. It is also designed to improve cement based mortars and concretes to waterproof them, enhance their workability and increase their tensile, flexural and bond strengths. The product conforms to EN-934-2:T9.
SikaWrap 300 BI-C/30 is a heat-set, bidirectional carbon fibre fabric for structural strengthening applications with a 0°-90° bidirectional weft for the dry application process. Particularly suited for the consolidation of structural strengthening applications in concrete, masonry and timber subjected to flexural and shear loading stress.
Sikadur 300 is a two part, epoxy based impregnating resin for SikaWrap fabric reinforcement for the wet application method and primer resin for the wet application system. Easy mix and application by trowel and impregnation roller, manufactured for manual or mechanical saturation methods, good adhesion to many substrates, High mechanical properties, extra...
Sika CarboDur S Type plates are pultruded carbon fibre reinforced polymer (CFRP) laminates designed for strengthening concrete, timber and masonry structures as part of the Sika CarboDur System. Sika CarboDur plates are bonded onto the structure as externally bonded reinforcement using Sikadur 30 structural adhesive.
SikaGrout 111 GP is a one part flowable shrinkage compensated general purpose cementitious grout which meets the requirements of BS EN 1504-6. Used for the anchoring of reinforcing bars, general purpose grouting, under stanchion plates, filling cavities, voids, gaps and recesses, sealing around penetrations, machine and base plates, post fixings. For...
Sika MonoTop 112 MultiUse Repair Mortar is a 1-component ready to use, thixotropic mortar, based on cementitious binder and selected aggregates, containing synthetic microfibers, for concrete repair. Used for restoration and repair of concrete elements, (columns, balcony edges), resurfacing of damaged areas on vertical or horizontal surfaces of concrete...
Sika AnchorFix 1 is a fast curing, solvent and styrene free, two part polyester anchoring adhesive. Intended for use as a fast curing anchoring adhesive for all grades of: Rebars / reinforcing steel, threaded rods, bolts and special fastening systems, concrete, hollow and solid masonry, hard natural stone and solid rock.
SikaWrap 930 G is a woven unidirectional glass fibre fabric, designed for structural strengthening applications as part of the Sika strengthening system. Designed for installation using the wet application process and is used for structural strengthening of reinforced concrete, masonry, brickwork and timber elements or structures, to increase flexural and...
Sikadur Combiflex CF Adhesive Type N and Type R are thixotropic two part adhesives based on epoxy resins and fillers. The Sikadur Combiflex CF Adhesive Type N and Type R are part of the Sikadur Combiflex System and used to glue the Sikadur Combiflex SG Tape or the Sikadur Hypalon Strip to different substrates. Type N (= Normal Potlife) and Type R (= Rapid...
Sika MaxTack Pro-50 Grip 'n' Grab is a multi-purpose, solvent based, trade strength adhesive that can be used for interior and exterior applications. Can be used in a multitude of applications from bonding skirting to fixing wall cladding, parquet flooring, sockets and decorative frames.