Alternatively you can email our sales & support team on [email protected]
Sikadur 31 EF
536985 , 534999
Sikadur 31 EF is a moisture tolerant, thixotropic, structural two part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10°C and +30°C.
Features and Benefits
Easy to mix and apply
Good adhesion to most construction materials
Thixotropic: non-sag in vertical and overhead applications
Hardens without shrinkage
Different coloured components (for mixing control)
Sikadur 31 EF is a moisture tolerant, thixotropic, structural two part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10°C and +30°C.
As a structural adhesive and mortar for:
Concrete elements
Hard natural stone
Ceramics, fibre cement
Mortar, Bricks, Masonry
Steel, Iron
Wood
Polyester, Epoxy
As a repair mortar and adhesive:
Corners and edges
Holes and void filling
Vertical and overhead use
Joint filling and crack sealing:
Joint and crack arris / edge repair
Sikadur 31 EF has the following advantages:
Easy to mix and apply
Good adhesion to most construction materials
Thixotropic: non-sag in vertical and overhead applications
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
Abrasion resistant
Impermeable to liquids and water vapour
Chemical resistant
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Sika MaxTack Instant Grab SF is a high strength solvent free gap filling adhesive that provides a quick “grab” and replaces mechanical fixings in a multitude of Home Improvement applications, both internally and externally.
The product has exceptionally quick drying properties for a solvent free adhesive achieving over 50% of its ultimate...
Sikadur 330 is a two part, thixotropic epoxy based impregnating resin / adhesive. Used as impregnation resin for SikaWrap fabric reinforcement for the dry application method, primer resin for the wet application system and structural adhesive for bonding Sika CarboDur plates into slits.
Features and Benefits
Easy mix and application by...
Sika CarboDur E plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber, masonry, steel and fibre reinforced polymer structures.
They are bonded onto the structure as externally bonded reinforcement using Sikadur 30 adhesive. Refer to the relevant Product Data Sheet for more detailed...
SikaBond AT Universal is a one part, solvent-free, elastic adhesive with a very good adhesion on non-porous and porous substrates for the following applications:
Internal and external bonding of cable channels, acoustic tiles, and door sills, lightweight construction materials, bonding of roof and wall coverings and cover plates etc....
Sika CarboDur S NSM are pultruded carbon fibre plates for structural strengthening as part of a Sika CarboDur system. Sika CarboDur plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber and masonry Sika CarboDur plates are bonded into slots as near surface mounted reinforcement using...
Sikadur 52 Injection Type N is a two part, solvent-free, low viscosity injection liquid, based on high strength epoxy resin. Type N (= Normal Potlife) is used for substrate temperatures between +5°C and +30°C (UK). Used as an injection resin with good adhesion to concrete, mortar, stone, steel and wood.
Features & Benefits...
Sika L2 High Flow is a one part, high flow, rapid strength cementitious grout which meets the requirements of BS EN 1504-6.
Used for precision, high performance, grouting underneath machine bases, structural steelwork, etc. For grouting precast concrete units and anchor bars, repairing concrete structures, filling voids, for grouting...
Sika AnchorFix 1 N is a fast curing polyester anchoring adhesive for use by experienced professionals only.
Standard guns can be used, can be used at low temperatures, ETA to ETAG 029 for anchoring in masonry, non-sag, styrene-free, low odour, low wastage. Used as a fast curing anchoring adhesive for all grades of rebars/reinforcing steel,...
Sika MonoTop 615 is an R3 cementitious high build concrete repair mortar. Sika MonoTop 615 is a one component cement based polymer modified high build repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN 1504-3.
Features and Benefits:
Pre-bagged for quality
Just add water
Sprayable by the wet spray method...
Sika FerroGard 903+ is a surface applied mixed corrosion inhibitor, designed for use as an impregnation of steel reinforced concrete.
Features and Benefits
Complies to principle 11 of EN 1504-9 method 11.3 (applying inhibitor to the concrete)
Does not change the appearance of the concrete structure
Does not alter the water vapour...
SikaWrap 600 C is a woven unidirectional carbon fibre fabric, designed for structural strengthening applications as part of the Sika strengthening system. It is a unidirectional woven heavy carbon fibre fabric with mid-range strength, designed for installation using the wet application process.
Features and Benefits
Multifunctional fabric...
Sikadur 31 DW Rapid is a solvent-free, thixotropic, two part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated to meet the requirements for use in contact with drinking water.
Features and Benefits
Can be used in drinking water areas
Easy to mix and apply
Very good adhesion to...
Sika InjectoCem 190 is a two part injection grout based on micro cement (d95 < 9.5μm) with added corrosion inhibitors. Used for injection of the Sika Injectoflex System, filling of voids, final rigid cementitious sealing of cracks, encasement of filler joists. It also provides simultaneous corrosion protection of steel reinforcement....
Sika MaxTack Pro-50 Grip 'n' Grab is a multi-purpose, solvent based, trade strength adhesive that can be used for interior and exterior applications.
It can be used in a multitude of applications from bonding skirting to fixing wall cladding, parquet flooring, sockets and decorative frames.
Features and Benefits
Trade strength performance...
Sika MonoTop 612 is an R4 hand placed/wet spray repair microconcrete. Sika MonoTop 612 is a cement-based, one component low permeability repair microconcrete, containing silica fume and polymer, meeting the requirements of Class R4 of BS EN 1504-3.
Features and Benefits:
Pre bagged for quality
Compatible with Sika FerroGard corrosion...
Sikadur Combiflex CF Adhesive Type N and Type R are thixotropic two part adhesives based on epoxy resins and fillers. They are part of the Sikadur Combiflex System and used to glue the Sikadur Combiflex SG Tape or the Sikadur Hypalon Strip to different substrates. Type N (= Normal Potlife) and Type R (= Rapid Potlife).
Features and Benefits...
