Sikadur 31 DW Rapid

Reference:

Manufacturer:

Sikadur 31 DW Rapid is a solvent-free, thixotropic, two part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated to meet the requirements for use in contact with drinking water. Easy to mix and apply, very good adhesion to most of the construction materials, non-sag and suitable for vertical and overhead application.

Bulk Buy

£183.87 tax excl.

£220.64   tax incl.

Product Description

Sikadur 31 DW Rapid is a solvent-free, thixotropic, two part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated to meet the requirements for use in contact with drinking water.

As a structural adhesive for the following substrates:

  • Concrete
  • Hard natural stone
  • Mortar, Bricks
  • Steel
  • As adhesive for use with Sikadur Combiflex SG

As a structural adhesive for precast concrete segments including:

  • Columns, beams etc.
  • Kerbs and edging stones, copings etc.

Rapid curing concrete repairs:

  • Corners and edges
  • Hole and void filling
  • Joint arrises

Joint filling and crack sealing:

  • Rigid joint filling
  • Crack filling and sealing (non moving)

Sikadur 31 DW Rapid provides the following advantages:

  • Can be used in drinking water areas
  • Easy to mix and apply
  • Very good adhesion to most of the construction materials
  • Thixotropic: non-sag and suitable for vertical and overhead application
  • Solvent free
  • Hardens without shrinkage
  • Different coloured components (for mixing control)
  • No primer needed
  • High initial and ultimate strengths
  • Good abrasion resistance

For more details please download the product data sheet from the 'DATASHEETS' tab above.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable