Sika MonoTop 112 MultiUse Repair Mortar is a 1-component ready to use, thixotropic mortar, based on cementitious binder and selected aggregates, containing synthetic microfibers, for concrete repair. Used for restoration and repair of concrete elements, (columns, balcony edges), resurfacing of damaged areas on vertical or horizontal surfaces of concrete...
Sika Multi-Stick based on hybrid polymer technology is the ultimate building adhesive, the first hybrid polymer grab adhesive especially created for the Trade, uniquely packed in a plastic 350ml cartridge. This superior adhesive has the ability to bond virtually anything to everything in both wet and dry conditions, and even underwater or in the rain.
Sika Multi-Stick based on hybrid polymer technology is the ultimate building adhesive, the first hybrid polymer grab adhesive especially created for the Trade, uniquely packed in a plastic 350ml cartridge. This superior adhesive has the ability to bond virtually anything to everything in both wet and dry conditions, and even underwater or in the rain. With incredible initial grab, high bonding strength, and almost limitless applications and other benefits, no tradesman should be without a tube of this next generation adhesive.
- Primerless adhesion to all common building substrates, porous and non-porous.
- Internal and External use.
- Fast curing.
- Solvent free.
- Virtually odourless.
- Low dirt pick up.
- Excellent break off and tooling.
- Weather resistant.
- UV resistant.
- Chemical resistant.
- Service temperature resistance (-50°C to +100°C).
- Suitable for use with glass, lead, polycarbonate, and acrylic sheets.
Areas for Use
- As a high quality nail replacement adhesive, even to damp surfaces.
- Bonding mirrors to most common substrates.
- Jointing cladding panels.
- Bonding difficult materials such as specialised polymer systems, metals and fibreglass
- Any application requiring high performance, durable bonding.
- Applications where resistance to chemical spillage is required (garage forecourts etc.)
- Use on overhead applications – Always use in conjunction with mechanical fixings.
- Use in conjunction with mechanical fixings for glass block fitting or large mirrors (>0.5m² total area)
- For heavy items, provide temporary support until adhesive has dried.
- In areas of high UV; some darkening/discolouration may occur. This does not affect the performance.
- Overpaintability: check compatibility with specific paint first before over painting large areas.
- Do not use on polythene safety backed mirrors, polypropylene or Teflon.
- Do not use on surfaces that bleed oils or plasticizers
- It is the user’s responsibility to determine suitability for use. If in doubt, please contact Technical Services Department for advice.
- Not for use as part of a glazing system.
- Not for use in aquarium manufacture.
- Not for use in conjunction with bitumen, or asphalt.
- Yellowing can occur in the dark.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Sika MaxTack Instant Grab SF is a high strength solvent free gap filling adhesive that provides a quick “grab” and replaces mechanical fixings in a multitude of Home Improvement applications, both internally and externally. The product has exceptionally quick drying properties for a solvent free adhesive achieving over 50% of its ultimate bond strength in...
SikaCem 133F Gunite is a dry sprayed fibre reinforced micro repair concrete. SikaCem 133F Gunite is a one component dry sprayed fibre reinforced micro-repair concrete with non-reactive aggregates.
Sika MonoTop 110 QuickFix Mortar is a 1-component fast setting ready-to-use mortar based on cementitious binder and selected aggregates, designed as a fixing mortar characterized by the early strength development. Specially designed for all those works where a rapid setting mortar is needed, e.g: Fixing of brackets, plugs, shelves, pipes / Anchoring of...
Remmers Betofix R4 SR is a fibre-reinforced PCC/SPCC for the static repair of concrete structures in areas under high chemical loads (up to and including exposure class XA 3). Combines corrosion protection, a bonding layer and coarse and fine mortar, Certified in accordance with DIN EN 1504-3, Can be sprayed and applied by hand. Image already added
Sika AnchorFix 1 is a fast curing, solvent and styrene free, two part polyester anchoring adhesive. Intended for use as a fast curing anchoring adhesive for all grades of: Rebars / reinforcing steel, threaded rods, bolts and special fastening systems, concrete, hollow and solid masonry, hard natural stone and solid rock.
Sika CarboDur BC Rods are pultruded carbon fibre reinforced polymer (CFRP) laminates with a circular cross section, designed for strengthening concrete, timber and masonry. Bonded into slots as near surface mounted reinforcement using Sika epoxy resin based adhesives, Sika CarboDur BC Rods can also be used for anchoring SikaWrap fabrics where positive...
Remmers Betofix HQ6 Grouting concrete is for use indoors and outdoors packing and mounting mortar for connecting machines, iron and concrete structures as well as wood elements. It can be produced with all conventional positive mixers. The grout material shows adjusted high early and ultimate strength in connection with very good flow properties. Image...
Sikaflex Tank N (available in packs of 20x 600cc sausages) is a 1-part elastic sealant for joints exposed to chemicals used in areas for the storage, filling and handling of water polluting liquids such as: Floor joints in petrol stations, joints in handling areas, storage tanks and containment bunds, etc. Image already added
SikaBond AT Universal is a one part, solvent-free, elastic adhesive with a very good adhesion on non-porous and porous substrates for the following applications: Internal and external bonding of cable channels, acoustic tiles, and door sills, lightweight construction materials, bonding of roof and wall coverings and cover plates etc. Non-corrosive,...
SikaCem 133S Gunite (formerly SikaCem 133 Gunite) is a cement based, polymer modified one component repair mortar containing silica fume and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3. Formulated for machine applications using the dry process without set accelerators, repairs may be profiled and trowel finished...
SikaWrap 301 C is a woven unidirectional carbon fibre fabric, designed for structural strengthening applications as part of the Sika strengthening system. Installed using the dry or wet application process. Structural strengthening of reinforced concrete, masonry, brickwork and timber elements or structures, to increase flexural and shear loading capacity.
Sika Galvashield XP Galvanic Anodes are used in concrete rehabilitation to prevent the formation of new corrosion sites adjacent to completed patch repairs. The anodes quickly and easily fasten to the exposed reinforcing steel. Once installed, the zinc core corrodes preferentially to the surrounding rebar, thereby providing galvanic corrosion prevention...
Sika CarboDur UHM (Ultra High Modulus) Plates are high performance, corrosion resistant carbon fibre plates manufactured to individual project dimensional specifications. When used in conjunction with the appropriate SikaDur structural epoxy adhesive, they form the Sika CarboDur Ultra High Modulus Plate System.
SikaWrap 900 C is a stitched, unidirectional carbon fibre fabric, designed for structural strengthening applications as part of the Sika strengthening system. SikaWrap 900 C is a unidirectional, fleece stabilised stitched heavy carbon fibre fabric with mid-range strengths, designed for installation using the wet application process.