Sika AnchorFix 1 N
  • Sika AnchorFix 1 N

Sika AnchorFix 1 N

461476

Sika AnchorFix 1 N is a fast curing polyester anchoring adhesive for use by experienced professionals only. 

Standard guns can be used, can be used at low temperatures, ETA to ETAG 029 for anchoring in masonry, non-sag, styrene-free, low odour, low wastage. Used as a fast curing anchoring adhesive for all grades of rebars/reinforcing steel, threaded rods, bolts and special fastening systems.

Features and Benefits

  • Fast curing
  • Standard guns can be used
  • Can be used at low temperatures
  • ETA to ETAG 029 for anchoring in masonry
  • Non-sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage
Colour
Size
£50.40
VAT excluded

£60.48 Tax incl.
Quantity

Description

Sika AnchorFix 1 N is a fast curing polyester anchoring adhesive for use by experienced professionals only.

Sika AnchorFix 1 N should be used as a fast curing anchoring adhesive for all grades of:

  • Rebars / reinforcing steel
  • Threaded rods
  • Bolts and special fastening systems

In the following substrates:

  • Hollow and solid masonry
  • Hard natural stone*
  • Solid rock*

*These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix 1 N Adhesive must be tested by first applying Sika AnchorFix 1 N Adhesive only to a sample area. Check in particular bond strength, surface staining and discolouration.

Features & Benefits

  • Fast curing
  • Standard guns can be used
  • Can be used at low temperatures
  • ETA to ETAG 029 for anchoring in masonry
  • Non-sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
461476

Data sheet

Manufacturer
Sika
For Use On
Concrete, Masonry, Natural Stone
Application Method
Application Gun
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
300ml Cartridge
UN Number
UN1866
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send