Sika CarboDur E plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber, masonry, steel and fibre reinforced polymer structures.
They are bonded onto the structure as externally bonded reinforcement using Sikadur 30 adhesive. Refer to the relevant Product Data Sheet for more detailed adhesive information.
Features and Benefits
For Professional use
Non corroding
Very high strength
Excellent durability
Unlimited lengths, no joints required
Low system thickness, simple execution of plate intersections or crossings
Easy transportation (rolls)
Lightweight, very easy to install, especially overhead (without temporary support)
Minimum preparation of plate, applicable in several layers
Smooth edges without exposed fibres as result of production by pultrusion
Sika CarboDur E Type plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber, masonry, steel and fibre reinforced polymer structures. Sika CarboDur E plates are bonded onto the structure as externally bonded reinforcement using Sikadur 30 epoxy resin based adhesive. Refer to the relevant Product Data Sheet for more detailed adhesive information. Sika CarboDur E may only be used by experienced professionals.
Sika CarboDur E systems are used to improve, increase or repair the performance and resistance of structures for:
Increased Load Carrying Capacity:
Increasing the load capacity of floor slabs, beams and bridge sections
For the installation of heavier machinery
To stabilise vibrating structures
For changes in building use
Damage to structural elements due to:
Deterioration of the original construction materials
Steel reinforcement corrosion
Accidents (Vehicle impact, earthquakes, fire)
Improvement of serviceability and durability:
Reduced deflection and crack width
Stress reduction in the steel reinforcement
Improved fatigue resistance
Change of the structural system:
Removal of walls and / or columns
Removal of floor and wall sections to create access / openings
Resistance to possible events:
Increased resistance to earthquakes, impact or explosion etc.
To repair design or construction defects such as:
Insufficient / inadequate reinforcement
Insufficient / inadequate structural depth
Features & Benefits
For Professional use
Non corroding
Very high strength
Excellent durability
Unlimited lengths, no joints required
Low system thickness, simple execution of plate intersections or crossings
Easy transportation (rolls)
Lightweight, very easy to install, especially overhead (without temporary support)
Minimum preparation of plate, applicable in several layers
Smooth edges without exposed fibres as result of production by pultrusion
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Sika CarboDur E Type is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Sika CarboDur M Type plates are pultruded carbon fibre reinforced polymer (CFRP) laminates designed for strengthening concrete, timber and masonry structures. They are bonded onto the structure as externally bonded reinforcement using Sikadur 30 structural adhesive.
Features and Benefits
Non corrosive
Very high strength
Excellent...
Sikadur 30 is a thixotropic, structural two part adhesive, based on a combination of epoxy resins and special filler, designed for use at normal temperatures between +8°C and +35°C for bonding Carbon Fibre & Steel reinforcement.
Features and Benefits
Easy to mix and apply
No primer needed
High creep resistance under permanent load...