SikaDecor 803 Nature
SikaDecor 803 Nature is a two component polymer modified mortar, based on portland cement, selected aggregates and admixtures, for levelling walls before application of SikaDecor 801 Nature. Surface regularisation and reprofiling before SikaDecor 801 Nature on cementitious concrete and mortar, bricks, floors and walls with prepared old ceramic coatings.
SikaDecor 803 Nature is a two component polymer modified mortar, based on portland cement, selected aggregates and admixtures, for levelling walls before application of SikaDecor 801 Nature.
Surface regularisation and reprofiling before SikaDecor 801 Nature on:
- Cementitious concrete and mortar
- Floors and walls with prepared old ceramic coatings
Features & Benefits
- Easy to apply
- Low shrinkage
For more details please download the product data sheet from the 'DATASHEETS' tab above. It is important that the manufacturer is contacted before use of these systems as a site visit/written specification may be required prior to use of these systems to ensure correct installation and suitability for the project in question.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close