Remmers SP Top White (Restoration Render)

0402
REM2769

Remmers SP Top White (formerly Restoration Render) is a fibre based, WTA restoration render that can also be applied in one layer used for the repair, renovation and restoration of damp, salt loaded wall surfaces and masonry work.

  • Can be used in combination with SP Levell (Part. 0401) in areas exposed to high levels of harmful salts
  • Promotes drying
  • Enables water vapour diffusion
  • Single-layer application thickness up to 30 mm
  • Machine workable

Colour
Size
£43.38(ex. VAT)
£52.06 (inc. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

Remmers SP Top White (formerly Restoration Render) is a fibre based, WTA restoration render that can also be applied in one layer used for the repair, renovation and restoration of damp, salt loaded wall surfaces and masonry work.

Features And Benefits

  • Binder with high sulphate resistance and low effective alkali content
  • Easy to apply and finish the surface in one coat up to 30mm thick!
  • Can be applied by machine
  • Highly stable
  • Promotes drying, salt resistant with large, active pore volume (> 50 %)
  • Prevents heat loss that results from the penetration of moisture
  • Condensation does not form on the surface
  • Resistant to water, weather and frost.

Surface Preparation

  • Ensure surface is clean, dust-free and capable of supporting a load. 
  • Remove render, paint layers and coatings at least 80 cm above the damaged area.
  • Chase out friable joints to a depth of at least 2 cm.
  • Pre-wet the substrate so that it is slightly moist.

Mixing Instructions

  • Pour water into a clean container and add dry mortar.
  • Mix thoroughly for approximately 3 minutes until the proper consistency for working has been achieved.
  • If using a rendering machine, the corresponding water control value must be determined on site.

Conditions For Use

Temperature of the material, air and substrate: from min. +5°C to max. +30°C Low temperatures increase, while high temperatures decrease the working and setting time.

Working Time

Approx. 60 minutes.

Directions

One-layer

 Apply product using a suitable tool or machine.

Two-layer

Roughen the first layer with a render comb. Apply second layer once the first is sufficiently dry. Embed the reinforcement fabric in the upper third of the render, with fabric widths overlapping by at least 10 cm. Level off the surface with a long float. Finish the surface once set. Prepare the surface for subsequent layers with a grated scraper after sufficient setting time.

Cleaning

Clean tools with water while the material is still fresh.

Storage

If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

Product Details
2769-304105

Data sheet

Manufacturer
Remmers
Interior / Exterior Use
Interior and Exterior
For Use On
Masonry, Concrete
Application Method
Trowel
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
20KG
Parts
One
Interior/Exterior Use
Both
Minimum Applied Thickness
5°C
Maximum Applied Thickness
30°C
Maximum Applied Thickness
30mm
Suitable Substrates
Masonry, Concrete
Application
Trowel
Pot Life (at 20°C)
60 mins
Coverage
8.5kg per m²/ per cm of thickness
Recommended Thinner/Cleaner
Water
Shelf Life (from date of manufacture)
12 months
UN Number
N/A
Product Range
SP Top
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Remmers SP Top White (Restoration Render) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT