Remmers WP RH Rapid (Rapid Hardener)

1010

Remmers WP RH Rapid (formerly Rapid Hardener) is used for fast, subsequent sealing of leaking areas, seepage water, water inrush and other leaks on concrete, masonry work and render in cellars, water tanks, tunnels, shafts, etc.

  • Reacts within seconds (begins to set after approx. 30 seconds)
  • Water pressure tight
  • Low shrinkage
  • Resistant to frost
  • Rapid repair of leaking areas, seepage areas and water inrushes
  • Plugging under Remmers grout systems

This product is subject is to a 7-10 day lead time.

Colour
Size
£22.14
VAT excluded

£26.57 Tax incl.
Quantity

Description

Remmers WP RH Rapid (formerly Rapid Hardener) is used for fast, subsequent sealing of leaking areas, seepage water, water inrush and other leaks on concrete, masonry work and render in cellars, water tanks, tunnels, shafts, etc.

Surface Preparation

  • Substrate must be clean, dust-free and capable of supporting a load.
  • Chisel out leaking areas to a width and depth of at least 3 cm; widen towards the inside in a wedge shape.

Mixing Instructions

  • Pour water into a clean container and add dry mortar.
  • Use a mixer to mix intensively and homogeneously until a suitable consistency is obtained.

Conditions For Use

  • Temperature of the material, air and substrate: from min. +5°C to max. +30°C.
  • Low temperatures increase, while high temperatures decrease the working and setting time.

Directions

  • Press dry material into the prepared leaking area.
  • Repeat multiple times if necessary and push material down.
  • In low outdoor temperatures, use warm water and material that has been stored at room temperature.
  • In case of particularly strong leaking or seepage areas, use relief tubes.

Cleaning

Clean tools with water while the material is still fresh.

Storage

If stored in an unopened container and in a dry place, the product will keep for approx. 12 months. Once containers have been opened, the contents should be used within one week.

This product is subject is to a 7-10 day lead time.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
1010

Data sheet

Manufacturer
Remmers
Interior / Exterior Use
Interior and Exterior
For Use On
Concrete, Masonry, Render
Application Method
Filling Knife
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
5KG, 15KG
Parts
One
Interior/Exterior Use
Both
Suitable Substrates
Concrete, Masonry, Render
Application
Filling Knife
Coverage
1.7 kg/l cavity
Recommended Thinner/Cleaner
Water
Max. Application Temperature
30°C
Min. Application Temperature
5°C
Density
1.2 kg/dm³
Shelf Life (from date of manufacture)
12 months
Shelf Life (Once Opened)
1 week
Touch Dry
30 seconds
UN Number
N/A
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send