- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. See our Waterproofing and Dampproofing page for more repair materials.
Tremco ES300 Surface DPM is a two part epoxy moisture vapour suppressant and surface damp proof membrane. Developed specifically for suppressing residual moisture on concrete and sand/cement subfloors and provides a surface damp proof membrane.
Benefits:
- Can be used as a sandwich damp proof membrane and bonding agent for quick-cure screed
- Allows the early laying of floor coverings to sand/cement and concrete bases
- Cures in approximately half the time of conventional epoxy systems
- Approved by major floor covering manufacturers
- Cost effective
- Available in Blue or Grey to differentiate between first and second coats
- Coverage of up to 40m² per 10kg unit
- For detailed product information please see the Product Data Sheet
Technical Data:
Property | Result |
---|---|
Composition | Part A - A low viscosity, light buff in colour, packed in a larger container to allow for mixing. Part B - A hardener of low viscosity, blue or grey in colour. The colouring of Part B serves as a visual aid for mixing, which is completed when a uniform colour is obtained |
Density | 1.16 - 1.18 |
Water Resistance | Excellent |
Chemical Resistance | Good |
Mix Ratio | Mix full kits only |
Coverage per coat | 4m²/kg depending on method of application and condition of substrate to give a dry film thickness of 200 microns per coat |
Hardening Time | 20°C: 1 hour 15 min 3 - 4 hours |
Service Temperature Range | -20°C to +80°C |
Storage | Store between +5°C and +30°C. Rotate stock using old material first |
Shelf Life | 6 Months when stored in its original unopened containers |
Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Data sheet
- Manufacturer
- Tremco
- For Use On
- Concrete, Cement, Sand
- Application Method
- Trowel, Roller
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 10KG
- Minimum Applied Thickness
- 200 microns
- Fully Cured (at 20°C)
- 3 - 4 hours
- Density
- 1.16 - 1.18
- Shelf Life (from date of manufacture)
- 6 months
- UN Number (Activator)
- UN2735
- UN Number (Base)
- UN3082
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tremco ES300 Surface DPM is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT