Tremco ES500 Sheet Membrane is a specially coated fibreglass underlay and acts as a continuous barrier substrate. It is moisture resistant to damp with resin peduncles on the underside.
Can be laid over a variety of surfaces, such as ceramic floor coverings, metal, access floors, subfloors contaminated with oil or paint, or damp subfloors
Suitable for general pedestrian and light commercial applications
Can be installed onto sand cement screeds and concrete with a structural DPM included in the construction up to a moisture content of 97% RH (99.9% theoretically)
Can be installed onto sand cement screeds and concrete without a structural DPM included in the construction up to a moisture content of 92% RH
Suitable for heated concrete and sand cement screeds provided the surface temperature does not exceed 27°C in accordance with BS 8203 and BS 5325
Tremco ES500 Sheet Membrane is a specially coated fibreglass underlay and acts as a continuous barrier substrate. It is moisture resistant to damp with resin peduncles on the underside. It is a low permeability material designed to overcome the problems sometimes encountered in laying sheet floorings over new or old subfloors.
Benefits:
Can be laid over a variety of surfaces, such as old resilient and ceramic floor coverings, metal, access floors, subfloors contaminated with oil or paint, or damp subfloors
Suitable for general pedestrian and light commercial applications
Cuts down installation time as it can be installed over damp and contaminated substrates
Can eliminate or reduce the need for mechanical preparation
Can be installed onto sand cement screeds and concrete with a structural DPM included in the construction up to a moisture content of 97% RH (99.9% theoretically)
Can be installed onto sand cement screeds and concrete without a structural DPM included in the construction up to a moisture content of 92% RH
Suitable for heated concrete and sand cement screeds provided the surface temperature does not exceed 27°C in accordance with BS 8203 and BS 5325
No VOCs
Reduced weight per square metre for easier handling
Max temperature (short exposure) 50°C Max temperature (constant) 30°C
Storage
ES500 should be stored in a cool, dry and well ventilated place. PVC products should be stored at temperatures between +10°C and +25°C and only briefly at temperatures higher than this. The products must be stored without being subjected to tension, pressure or other deformations as stresses can encourage both permanent deformation and the formation of cracks.
Shelf Life
2 - 4 years under correct storage conditions
Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tremco ES500 Sheet Membrane is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tremco ES501 Kwiklay Tape is a special adhesive tape for applying over the joints when installing Tremco ES500 Sheet Membrane.Helps to provide a complete moisture proof seal Supplied as a 47.5m Roll Please note this product is Made To Order subject to a minimum order quantity of 72 units and a lead time of 7 working daysMore...