

Tor Elastadeck Grit Coat is a two pack moisture activated polyurethane coating with zero solvent odour, providing a long term waterproofing membrane for protection of balconies. Basecoat with grit broadcast as part of a multi-layer Elastadeck Balcony System providing a hardwearing, resin flooring system, designed to waterproof and provide slip resistance to balconies and walkways:
Tor Elastadeck Grit Coat is a two pack moisture activated polyurethane coating with zero solvent odour, providing a long term waterproofing membrane for protection of balconies. Basecoat with grit broadcast as part of a multi-layer system.
Surface Preparation
Ensure all surfaces are clean, sound, dry and free from oil, grease, grime and other surface contaminants. If necessary, ensure the primer is adequately cured (see data sheet Tor Elastaseal Z Binder Sealer (RC144)) before applying the Tor Elastadeck Grit Coat.
Application
Apply using a short/medium pile fleecy roller in conjunction with Finbar roller. Cast Tor White Aluminium Oxide Grit into the wet coating at approximately 1kg/m² to increase surface wear, protection and slip resistance.
Limitations
Tor Elastadeck Balcony System is a Premium Balcony and Communal walkway system that is fast-curing (60-90 minutes per coat), hardwearing, resin flooring system, designed to waterproof and provide slip resistance to balconies and walkways. The system is specifically intended for use on medium to high wear areas on communal balconies and walkways. Typically, such areas will consist of bare concrete or asphalt.
The new Elastadeck system has been specifically designed for use on communal walkways and balconies. Its low odour, fast-cure formula provides a waterproofing system combined with a highly durable, slip-resistant finish. This purpose-built product allows quick and efficient installation on site, requiring less coats and less disruption in areas of foot traffic. Elastadeck is also suitable for external landings, access areas and escape routes in social housing blocks. It has also been specified for balconies and walkways in hotels and hospitals, access areas in car parks and walkways and escape areas in shopping centres.
The Elastadeck Balcony System is suitable for external walkways and balconies, usually found in:
System Features & Benefits
*Curing times (at 20°C): 90mins for Tor Elastadeck Grit Coat only. Tor Elastadeck Sealer Coat walkable after a further 90 mins.
The System (The following specification is included for demonstrative purposes only. Always consult the Technical Department before applying. All areas should be suitably prepared according to the detailed Tor specification, prior to application.)
Primer (Only required on porous or metallic surfaces, the following options are available)
Reinforcement Matting
Gritcoat
Topcoat (Only required for 15yr system)
Edge System
Download the Elastadeck System Data Sheet and/or Elastadeck PB System Data Sheet for more details
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.