- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Tor Elastadeck Edge Detail Topcoat
RC553
This product is temporarily unavailable; in the meantime, our technical team recommend KoverTek TekPur Waterproof Balcony Kit as a great alternative - use discount code MAY10 at checkout to save 10%!
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Tor Elastadeck Edge Detail Topcoat is a two pack, zero solvent odour, ultra high solids pigmented elastomeric coating. It is a long term, heavy duty specialist protective top coat for edge details, upstands, plinths etc on walkways, balconies, terraces etc. used in conjunction with Tor Elastadeck Edge Detail Basecoat (RC543) as part of a complete Tor Elastadeck balcony system.
Description
Tor Elastadeck Edge Detail Topcoat is a two pack, zero solvent odour, ultra high solids pigmented elastomeric coating. It is a long term, heavy duty specialist protective top coat for edge details, upstands, plinths etc on walkways, balconies, terraces etc. used in conjunction with Tor Elastadeck Edge Detail Basecoat (RC543) as part of a complete Tor Elastadeck balcony system.
Surface Preparation
Ensure surface is clean, sound, properly prepared, dry and free from oil, grease and other surface contaminants.
Application
Ensure surfaces are completely dry, properly prepared and (where applicable) primed. Apply by brush or roller a full intermediate coat of Tor Elastadeck Edge Detail Basecoat (RC543). Allow to cure overnight in good drying conditions (allow longer in cold weather) before applying the final protection coat of Tor Elastadeck Edge Detail Topcoat (RC553).
Limitations
- This product should only be applied by Tor approved contractors (further details on request)
- Surfaces must be dry during application otherwise curing defects will occur. (Impervious gloves should be worn during application to avoid skin moisture contact)
- Temperatures above 25°C and very high humidity will reduce pot life, and may give poor levelling. Application at very low temperatures will significantly retard the curing process and may present application difficulties.
- Overcoating times should be observed. Surface abrasion and/or solvent wiping may be necessary if times are exceeded.
Download the Elastadeck System Data Sheet and/or Elastadeck PB System Data Sheet for more details
Product Details
RC553
Data sheet
- Application Method
- Brush, Roller
- Sheen
- Gloss
- Colour
- Standard / Ready Mixed
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 2.5L
- Application
- Brush, Roller
- Coverage
- 3m² per litre
- Touch Dry
- 90mins
- UN Number
- N/A
Be the first to ask a question about this product!
