

OPEN AS USUAL DURING LOCKDOWN #3
Use Eagle Aquapol Acrylic Roof Coating for emergency repairs and routine maintenance on most surface types on failed industrial and domestic roofs. The coating is instantly waterproof after a single coat, applying even in damp conditions, remaining flexible with exceptional weather resistance.
**Available for delivery - see Delivery Options below**
Eagle Aquapol Acrylic Roof Coating is a one coat waterproofing system designed for the repair and refurbishment of failed industrial and domestic roofs. The high performance acrylic-based roof coating contains fibres and is instantly waterproof, appying to surfaces even in damp conditions. Ideal for emergency repairs and routine maintenance on most roof types, Eagle Aquapol Acrylic Roof Coating remains fully flexible and is easily applied by brush or roller straight from the tin.
Suitable for most roof surfaces, including:
It will also waterproof:
As with all surface coatings, preparation of the surface is of great importance and will influence the degree of adhesion obtained and the life of the coating.
Ensure surfaces are structurally sound, clean, free from dust, loose debris, algae and any contaminants and free from standing water.
Repair all cracks, splits & grazed areas. Fill holes and imperfections with Eagle’s Bitumen Mastic.
Stick down loose felt with Eagle’s felt adhesive. Blisters in felt must be cut, dried, re-bonded and sealed.
Do not use on XPS or pvc foil or in areas where subsequent solvent or oil contact is likely.
Clean all moss, lichen and debris from the roof to give a clean dust free surface. Aquapol can be applied to damp surfaces, ensure excess water has been brushed away and all surface contaminants have been removed.
Aquapol requires no primer, however, on highly porous or friable surfaces a heavy coat of Eagle Bitumen Primer may be necessary. It is therefore good practice to carry out adhesion tests prior to application of the coating.
Stir the container well before use. Apply by brush or roller straight from the container in a single uniform application at the rate of 1-2kg per m² depending on application & surface. Ensure gaps or cracks are completely covered, as Aquapol contains fibres that will bridge and seal them permanently.
Typical Properties | |
---|---|
Coverage | 1-2kg per m2 on average |
Flash Point | 40°C Min |
Service Temperature Range | -10°C to +85°C (depending on ambient conditions) |
Application Temperature | 5°C TO 35°C |
Fire Resistance | Wet: Flammable |
Shelf Life | 12 Months, Stored under cover & between 5°C- 20°C |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
![]() | Question:
Hi, What colour does this waterproof paint come in? Is there a Dark Grey or a Clear transparent type? Where can I buy off the shelf today as the roof of my truck is leaking!! Help! Thanks in anticipation. Roger C-P 07455173618 |
Answer:
Eagle Aquapol Acrylic Roof Coating is available in a standard Grey finish only. We keep this in stock in our Leeds store - LS11 9NF. | |
![]() | Question:
What is the max size hole (diameter) that will be filled effectively by using this product? I can see daylight thru a narrow crack in my garage roof and also a small hole approx half a cm diameter. A ‘handyman’ has suggested application of Aquapol as a solution. The roof is asbestos (asbestos/ concrete sheets I believe). |
Answer:
There isn't a defined limit to the size of hole that can be bridged as it can depend on the substrate but we'd expect it to bridge over half a centimetre with no problem at all. At worst if it doesn't bridge the gap then you could use a small piece of Hessian or plasterers scrim to help it to bridge the gap. In this case you would need to put some Aquapol down first around the hole, put the mesh or hessian into it and then paint straight over the whole area. | |