Rust-Oleum Waterproof Kit
  • Rust-Oleum Waterproof Kit

Rust-Oleum Fillcoat Fibres Repair Kit

26.KIT.1
RUS587

Rust-Oleum Fillcoat Fibres Repair Kit is an emergency repair, instantly waterproofing, fibre reinforced complete kit for flat and pitched roofs. Kit includes 1 litre of Dark Grey Rust-Oleum Mathys Fillcoat Fibres, instruction sheet, brush, gloves, stirring stick, sanding pad, crack bridging fleece.

  • Complete kit
  • Repairs holes and cracks up to 2mm instantly
  • Excellent adhesion to various substrates
  • Can be applied in all weather conditions
  • Direct repair of gutters, roofs, chimney stacks, pipes and more
  • Bitumen-free formula
  • Stops leaks instantly, crackbridging

Colour
Size
£23.11(ex. VAT)
£27.73 (inc. VAT)
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

Description

Rust-Oleum Fillcoat Fibres Repair Kit is an instantly waterproof, fibre reinforced repair complete kit for flat and pitched roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes, etc. Fillcoat Fibres seals leaks and cracks up to 2mm wide, quickly and simply, even in bad weather.

Kit includes: 

  • 1 litre of Dark Grey Rust-Oleum Mathys Fillcoat Fibres
  • Instruction sheet
  • Brush
  • Gloves
  • Stirring stick
  • Sanding pad
  • Crack bridging fleece



Quick Links - Click To Jump To Section:




Features & Benefits


  • Immediate waterproofing against leaks
  • Contains fibres for bridging of cracks up to 2mm
  • Can be applied in all weather conditions
  • Bitumen-free formula
  • Product is recoatable with Dacfill, or Dacfill HZ
  • Long shelf life
  • For flat and pitched roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes, etc
  • Also available as a smooth version (Rust-Oleum Mathys Fillcoat)



Theoretical Consumption


  • 1 coat of 1.5 l/m²



Drying Times


  • Dry to recoat: 3 - 14 days with the same product. 6 weeks with a paint



Preparation


  • Remove dust, mud, grease, moss and withered leaves carefully.
  • The spots to be repaired are cleaned with a hard broom and sponged.
  • Fillcoat Fibres can be applied directly on bituminous substrates, hard PVC, polyester, zinc, aluminium, glass, tiles, etc.
  • Porous materials (concrete, stone, wood) must first be dried and pre-treated with a coat of Primer 44HS.
  • In case of repeatedly repaired spots, important or active cracks, apply Fillcoat Fibres crosswise over the cracks or fissures.



Application


  • To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
  • Can be applied during all weather conditions, except for snow.

Brush:

  • Do not dilute.



Cleaning




Shelf Life & Storage


  • 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.



Safety Data


SAFETY DATA
VOC level: 485 g/l
VOC readymix: 485 g/l
VOC category: A/i
VOC limit: 500 g/l
Grenelle: Exterior

 

Consult Safety Data Sheet and Safety Information printed on the can.

Product Details
587-231112

Data sheet

Manufacturer
Rust-Oleum
For Use By
Professional Use
For Use By
General Use
For Use By
Industrial Use
Interior / Exterior Use
Exterior
Interior / Exterior Use
Exterior
Water / Solvent Based
Water
For Use On
PVC, Polyester, Zinc, Aluminium, Glass, Concrete, Stone, Wood
Application Method
Brush
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Single, Two or Three Pack
Single
Pack Size
1L
Application
Brush
Dry to Recoat (at 20°C)
3 - 14 days with the same product. 6 weeks with a paint
Coverage
1m² per kit
Density
1,03
Solids by Volume
43 %
VOC
485 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry
2 hours (waterproof instantly)
UN Number
Not regulated
Consumption
1 coat of 1,5 l/m²
Usages
Roofs
Product Type
Kit
Fastest Delivery
Next Working Day
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions nigel on 2021-09-30 16:50:46
Question: 

Can this product be used on rust and cracks on steel narrowboat roof?

Answer from Rawlins’ Technical Team: 
Yes, Rust-Oleum Fillcoat Fibres Repair Kit may be used for this purpose, depending on the size of the cracks and how large the “damaged” area is will determine the effectiveness of this.
This product can repair holes or cracks upto 2mm. 
This would require the steel to be thoroughly de-rusted first of all.
questions N King on 2021-09-29 18:12:55
Question: 

Is this product good for filling cracks in a steel narrowboat roof?

Answer from Rawlins’ Technical Team: 
Yes, Rust-Oleum Fillcoat Fibres Repair Kit may be used for this purpose, depending on the size of the cracks and how large the “damaged” area is will determine the effectiveness of this.
This product can repair holes or cracks upto 2mm. 
This would require the steel to be thoroughly de-rusted first of all.
questions Guy Marshall on 2021-05-19 12:11:54
Question: 

I have a zinc roof which has a small crack in it. The area has already been sealed with "Elastathane 25" sealant about 4 years ago, but the crack has now developed again. Can this product be used on top of the Elastathane sealant?

Answer from Rawlins’ Technical Team: 

Thank you for the enquiry, we have contacted you directly for more information.

questions Mark Evans on 2020-04-15 15:45:52
Question: 

Hi Can localised repairs on a corrugated steel roof then safely be painted over with Rust-Oleum Mathys Noxyde Pegarust? Thanks

Answer from Rawlins’ Technical Team: 

Due to Rust-Oleum Mathys Noxyde Pegarust being solvent based we cannot recommend this for application over Rust-Oleum Fillcoat Fibres Repair Kit.

For this application we can recommend Rust-Oleum Mathys Noxyde.

questions Neil McGeoch on 2020-01-13 20:01:16
Question: 

Can this product be used to seal a secret cast iron gutter? I have a leak and believe it's in the gutter which would cost a fortune to replace, would this fix the problem?

Answer from Rawlins’ Technical Team: 

Yes, it can be applied to the inside of the gutter providing it is clean and free from rust.

questions Jes on 2019-12-19 15:20:56
Question: 

Can this product be used to seal small holes (nail pop up) on a felt roof (garden shed). Thanks

Answer from Rawlins’ Technical Team: 

Yes this would be fine.

questions Kevin Stockford on 2019-10-26 11:24:52
Question: 

Can I use this product to seal a water leak on a join across the top of a caravan and does it dry white

Answer from Rawlins’ Technical Team: 

Yes the product could be used for the application you have described but Rust-Oleum Fillcoat Fibres Repair Kit is Dark Grey in colour. If you require a product white in colour we would instead suggest Britannia Aquashield High Build which can be used in conjunction with Britannia Reinforcing Scrim if required.

questions Roland on 2019-07-11 13:57:59
Question: 

Can this product be used on flat roof covered with rubber lining materials

Answer from Rawlins’ Technical Team: 

No, we would instead recommend Gaco Liquid Roof Tape.

questions Sam Dorrian on 2019-06-04 09:44:50
Question: 

Can this product be used to seal a failed lead box gutter? The product specification references zinc but not lead. Thanks

Answer from Rawlins’ Technical Team: 

Yes, this product after cleaning and preparation can be applied to lead and is ideal in gutters.

questions colin stewart on 2019-05-06 12:26:24
Question: 

Can this product be used to seal cracks in corrugated Asbestos roofing AND from the INSIDE ??

Answer from Rawlins’ Technical Team: 

This product would be for use on the exterior (top side) of the roof only and the surface (after cleaning in accorandce with local regulations) would first need to be primed with Rust-Oleum Mathys Primer 44 HS. If you the wished to encapsulate the interior, underside of the roof to seal isolated asbestos fibres and prevent release you could use Thermoguard Asbestos Encapsulating Coating.

questions Debra on 2018-07-10 14:19:10
Question: 

Can I use this product on concrete gutters to seal them

Answer from Rawlins’ Technical Team: 

Yes, however porous materials (concrete, stone, wood) must first be dried and pre-treated with a coat of Rust-Oleum Mathys Primer 44 HS.

questions trevor on 2018-06-25 11:08:57
Question: 

can i use rust-oleum fibre kit on my corrugated steel roof to repair a leak and how long would it likely last

Answer from Rawlins’ Technical Team: 

Yes, Rust-Oleum Fillcoat Fibres Repair Kit may be used for this purpose, obviously depending on the actual source of the leak, and how large the “damaged” area is will determine the effectiveness of this. In terms of longevity we would estimate approximately five years, but this would require the steel to be thoroughly de-rusted first of all.

questions m jones on 2018-06-12 09:39:36
Question: 

Good Morning .... I have a slate water feature in my garden and the water compartment has sprung a leak .... would Rust-Oleum Fillcoat Fibre Repair kit solve the problem and if so can I paint it onto the inside of the tank? Thank you.

Answer from Rawlins’ Technical Team: 

We would suggest that the Fillcoat Fibres could offer a short term solution for this issue. However, we are presuming there has been some kind of structural failure (hence “springing a leak”) and without knowing more about that, we cannot advise how effective the Fillcoat Fibres will be, or for how long.

questions Craig Bell on 2018-02-03 20:15:41
Question: 

Rust-Oleum Fillcoat Fibres Repair Kit. Can this be used to repair flat fibreglass roof? Thanks

Answer from Rawlins’ Technical Team: 

Yes.

  

Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum Thinner 22

Rust-Oleum Thinner 22 is for the dilution of synthetic enamels and varnishes for airless application. Degreasing of metals and most wood types. Cleaning of `spots` of acrylic paints and acrylic fixing paints (e.g. on glass). Best used to dilute the following products: Primer 44 Fassiclor Galvaprim Vernac Gloss Vernac Satin More...

Price £29.61 (ex. VAT)
Temporarily Out-of-Stock

Rust-Oleum Mathys Dacfill Waterproofing

Rust-Oleum Mathys Dacfill Waterproofing is a watertight, water-based liquid membrane for roofs: Forms a lasting elastic coat without joints or seams on sloping roofs (min. 5% slope) Has been tested and independently approved for asbestos encapsulation which makes it an excellent alternative to asbestos sheet replacement saving cost, time...

Price £43.18 (ex. VAT)
In Stock and Available for Delivery

Rust-Oleum Mathys Dac Hydro Alu

We no longer stock this product, but can recommend Eagle DoubleCoat Pro-Reflect Liquid Waterproofing as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our...

In stock

Rust-Oleum Mathys Fillcoat

Rust-Oleum Mathys Fillcoat is an instantly waterproof, smooth liquid finish for roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes, etc. It seals small leaks quickly and simply, even in bad weather! It is a thick, smooth waterproof paint for the immediate renovation and waterproofing of roofs providing a seamless...

Price £14.43 (ex. VAT)
In Stock and Available for Delivery

Rust-Oleum Mathys Primer 44 HS

Rust-Oleum Mathys Primer 44 HS has a large fixation capacity for stabilising loose particles and improving the adherence of subsequent topcoats. Unsaponifiable Good UV resistance Excellent fixation on roofs Very flexible   Chlorinated rubber technology, solvent-based  Quickly water-resistant (1 hour after application at 20°C)...

Price £68.63 (ex. VAT)
In Stock and Available for Delivery

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £8.02 (ex. VAT)
In Stock and Available for Delivery