"

Tor Raincoat Fibretex

Tor Raincoat Fibretex View larger
Typical Coverage (per coat)2m² per litre
Touch Dry4 Hours
ApplicationBrush, Roller
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Tor Raincoat Fibretex (RC301) is a single pack, high build coating, based on a special modified acrylic/urethane resin system, containing inert pigments extenders and flame retardant agents, and reinforced with inert fibres for the waterproofing of sound solid sheeted pitched roofs (eg. asbestos/fibre, cement, factory coated profiled metal etc).

Read Full Description

More details

£51.09 + VAT

Tor Raincoat Fibretex (RC301) is a single pack, high build coating, based on a special modified acrylic/urethane resin system, containing inert pigments extenders and flame retardant agents, and reinforced with inert fibres for the waterproofing of sound solid sheeted pitched roofs (eg. asbestos/fibre, cement, factory coated profiled metal etc).

Preparation

The roof surface does not need to be completely dry, but care should be taken to ensure surfaces/substrates are adequately prepared and visibly dry. Identify any leaks. Remove any existing unsound remedial repairs, weak or loose material. Thoroughly scrub surfaces to be treated with a stiff bristle brush to remove dust, grime, loose chippings, etc and wash down to ensure proper cleaning. Moss, lichen, fungal growth, etc should be treated with Torkill W Fungicidal Wash (DM405). Porous or friable surfaces should be treated with Raincoat Stabilising Sealer (RC351). Solvent sensitive (eg. bituminous) surfaces should be treated with Raincoat Metallic Primer (RC352). Treat cleaned metal surfaces with Raincoat APA (RC353).

Ensure any gaps, splits etc are properly rectified, and if necessary stabilised with bridging/bond break tapes and Elastamat glass fibre mat reinforcements in conjunction with suitable embedment coats (e.g. Elastaseal or Torprufe CRC as appropriate).

Application

Brush and short/medium pile roller. Touch-in/stripe coat any minor cracks, lap joints, minor gaps etc. before applying main coat. Significant gaps/movement areas are likely to require additional treatment.

Limitations

  • Do not apply if rain is imminent.
  • Overcoating must be carried out within the timescale stated to ensure maximum intercoat adhesion and avoid film defects. Surfaces must be clean.
  • The product gives a flexible film in normal use, but alternative special reinforcement coating systems may be required in areas subject to movement.
  • The product contains strong industrial solvents which may affect existing coatings and substrates. Prepare small test area if necessary.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Raincoat Fibretex TDS

Download

Raincoat Fibretex MSDS

Download

Raincoat System Sheet

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.