- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
We no longer stock this product, but can recommend Tor Transglaze Z Clear as a great alternative.
Tor Transglaze (RC105) is a single pack, high solids, moisture activated urethane membrane providing a UV and weather stable elastomeric membrane for protection, refurbishment and upgrading of plastic rooflights. Applied as a two coat system with or without reinforcement depending on rooflight condition and service requirements. Available as a clear coat.
Tor Transglaze (RC105) is a single pack, high solids, moisture activated urethane membrane providing a UV and weather stable elastomeric membrane for protection, refurbishment and upgrading of plastic rooflights. Applied as a two coat system with or without reinforcement depending on rooflight condition and service requirements. Available as a clear coat.
Preparation
All surfaces should be sound, thoroughly cleaned, dry and free from all contaminants.
1. Glass Reinforced Polyester (GRP)
- a) New sheets – solvent wipe then lightly abrade
- b) Weathered sheets – thoroughly scrub clean using Torclean WB Pre-wash DM416, rinse then abrade to remove loose glass fibres etc.
2. Acrylic Sheets
Thoroughly clean down to remove surface contaminants and lightly abrade
3. Polycarbonate Sheets
Thoroughly clean down to remove surface contaminants and lightly abrade
Application
Brush or roller
- a) reinforced system – insert Tor Elastamat Regular glass fibre matting into wet coating, allow to dry then cut out any stray fibres, etc and “seal in” with a further coat of product.
- b) Unreinforced system – apply two coats at the prescribed coverage rates.
Limitations
- Overcoating must be carried out within the timescale stated, otherwise solvent wiping and/or abrading may be necessary to achieve satisfactory intercoat adhesion.
- This product is moisture sensitive. Take out a working quantity and reseal tin immediately.
- Self contained breathing apparatus should be worn when spraying.
- Application to clean glass is possible, though wet adhesion cannot be guaranteed.
Data sheet
- Manufacturer
- Tor Coatings
- For Use On
- GRP, Acrylic Sheets, Polycarbonate Sheets
- Application Method
- Brush, Roller
- Colour
- Clear
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Application
- Brush, Roller
- Coverage
- 3 - 4m² per litre
- Touch Dry
- 3 Hours
- UN Number
- UN1263
- Brand
- Tor Coatings
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Transglaze is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT