Britannia Aquashield Aggregated
  • Britannia Aquashield Aggregated
  • Britannia Aquashield Aggregated
  • Britannia Aquashield Aggregated
  • Britannia Aquashield Aggregated
  • Britannia Aquashield Aggregated

Britannia Aquashield Aggregated Coating

WPRCA

Britannia Aquashield Aggregated Coating is a one-pack solvent-based coating used on exterior high-level walkways and gutters as a safety measure.

  • Waterproofs instantly
  • Particularly suitable for general maintenance work
  • Rainfall immediately after application has no adverse effect
  • Can be brush or roller applied
  • Please note that Black & Solar Reflective White are subject to a minimum order quantity of 360kg in any pack size derivative

**Available for delivery - see Delivery Options below**

Colour
Size
£12.97
VAT excluded

£15.56 Tax incl.
Quantity

Description

Please note that Black & Solar Reflective White are subject to a minimum order quantity of 360kg in any pack size derivative.

Britannia Aquashield Aggregated Coating is a one-pack solvent-based aggregated coating for safety on high level walkways and gutters. It is ready for use on flat roofs, pitched roofs, high level walkways, weathered asphalt and bituminous surfaces, gutters, concrete, brickwork, GRP and fibreglass, felt and metal (galvanised and ferrous).

It waterproofs the substrate instantly and rainfall immediately after application has no adverse effect.

Not for use on balconies, timber surfaces, new and aged PVC, plasticised PVC (Plastisol) or internal use.



Quick Links - Click To Jump To Section:




Features & Benefits


  • One-pack product
  • Solvent-based
  • For safety on high level walkways and gutters
  • Ready for use on flat roofs, pitched roofs, high level walkways, weathered asphalt and bituminous surfaces, gutters, concrete, brickwork, GRP and fibreglass, felt and metal (galvanised and ferrous)
  • Rainfall immediately after application has no adverse effect
  • Particularly suitable for general maintenance work
  • Can be brush or roller applied
  • Good curing performance at low temperatures
  • Non-flammable
  • Application by brush or solvent resistant roller
  • External use only



Spreading Rate


These will vary depending on substrate, the site conditions and longevity required.

Typically spreading rates will vary depending on the end use.

  • High Build Coat: between 1kg - 2kg per square metre dependent on substrate
  • Applied as a topcoat approximately 1kg per square metre dependent on substrate



Drying Times


  • Up to 4-7 days depending on temperature, thickness of coating
  • The product may remain slightly soft for a further period depending on climatic conditions, this is not detrimental to the waterproofing qualities of the product



Preparation


Clear all areas of moss, lichen and debris by brushing or power washing and remove surface water and any contamination such as oil or grease and allow to dry. Apply Britannia Fungicidal Wash to prevent further fungal/algal growth.

Most roofing substrates to be treated will not normally require priming.

Highly Porous/Friable Surfaces:

  • Concrete, Concrete and Asbestos Cladding, Sheeting and Guttering should be primed with Britannia Aquashield Primer (see separate technical sheet) prior to over coating with Britannia Aquashield Aggregated Waterproof Roof Coating
  • These surfaces must be jet washed prior to applying the Britannia Aquashield Primer

Metal Surfaces:

  • Ferrous-New, Weathered and previously painted galvanised iron and steel
  • Non-Ferrous Metals - Aluminium sheeting & Aluminium Alloy Box gutters and previously painted non-Ferrous Metals
  • All these areas should be suitably prepared and primed as appropriate (see separate technical sheet) before application of Britannia Aquashield Aggregated Waterproof Roof Coating

Non-Porous Substrates:

  • Slate, Polished bricks should be power washed abraded and completely dry, free from any contamination to achieve adhesion of the Britannia Aquashield Aggregated Waterproof Roof Coating

Bitumen Surfaces:

  • Discolouration may occur over a new asphalt, tar or bitumen surface; therefore an extra coat may be required, for decorative purposes only
  • Aged bitumen can be liable to crack, therefore further advice must be taken

Previously Painted or Coated Substrates:

  • It is good practice to inspect and carry out adhesion tests prior on any existing coating or substrate prior to application of the coating

Splits, Cracks, Joints and Seals:

  • Pay particular attention to clean out any splits/cracks/joints and seals by scraping or brushing off with a stiff bristle brush before applying the Britannia Aquashield Primer
  • Repair all faults in the surface by either Britannia’s Reinforcing Scrim in the first of two coats or using a proprietary sealer

Crazed Areas:

  • These should be primed with Britannia Aquashield Primer prior to the application of a coat of Britannia Aquashield Aggregated Waterproof Roof Coating

In areas where excessive movement may occur additional reinforcement must be incorporated into the coating.



Application


  • To the dry and cleaned surface, apply a generous coat of Britannia Aquashield Aggregated Waterproof Roof Coating by brush, roller or squeegee, at the minimum specified spreading rate as stated above under the heading
  • Please follow the coverage rates shown in Spreading Rate Section
  • Application Temperature should be between 5°C-25°C



Cleaning


  • For all cleaning use White Spirit



Shelf Life & Storage


  • Up to 2 years if stored correctly in an unopened container



Precautions


  • Flammable - keep away from sources of ignition
  • Ensure good ventilation during application
  • Over occupied premises during insulation of coatings we would advise keeping windows closed
  • Wear gloves, goggles and suitable protective clothing
  • In case of contact with eyes rinse immediately with plenty of water and seek medical advice
  • Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water
  • Keep out of reach of children
  • Do not use near fishponds
  • Toxic to aquatic organisms
  • May cause long term adverse effects in the aquatic environments
  • Do not empty into drains



Product Details
WPRCA

Data sheet

Interior / Exterior Use
Exterior
Water / Solvent Based
Solvent
For Use On
Metal, Concrete, Fibreglass, Aluminium, Galvanised Iron, Steel, Bitumen, Slate, Brickwork
Application Method
Brush, Roller
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
1KG, 2.5KG, 5KG, 20KG
Coverage
1kg per square metre dependent on substrate.
Touch Dry
Up to 4-7 days depending on temperature, thickness of coating.
UN Number
UN1263
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Britannia Aquashield Primer

Britannia Aquashield Primer is a solvent based primer for very porous and loose/friable surfaces. It ensures the Aquashield topcoat delivers optimum waterproofing performance. Works instantly Vital stabilisation of highly friable/porous surfaces Rainfall immediately after application has no adverse effect Can be brush, roller or spray...

Price £37.42
In stock

Britannia Fungicidal Wash Solution

Britannia Fungicidal Wash Solution is a powerful cleaner for external hard surfaces such as tiled roofs, walls, timber decking, block paving and cladding. Contols and treats fungal and algal growth prior to painting Water-based Can be brush or spray applied Easy, quick and safe to use More Information **Available for delivery - see...

Price £18.47
In stock