Use Eagle Desmopol Liquid Polyurethane Membrane to waterproof flat roofs, walkways and balconies. The high elastomeric waterproofing liquid membrane is the perfect solution for waterproofing complicated roofs, such as those with detail work.
Desmopol Liquid Polyurethane Membrane can be applied wet-on-wet fully reinforced with excellent adhesion to most substrates without the use of primer, including bitumen, GRP, torch-on felts, OSB, single ply, over PIR boards, asphalt or on warm roofs, etc.
Holds BBA/ETA certification for life expectancy in excess of 25 years
Protects against corrosion, rust and wear
Easy and quick application. No reinforcement required
Can be applied even with zero pitch
No seams or overlaps
600% Elongation: High resistance to abrasion and high elasticity
Applications
Desmopol Liquid Polyurethane Membrane can be used on a variety of surfaces and substrates - please refer to the relevant data sheets for information on application methods and recommendations or give our technical team a call on 0113 2455450.
Please see the Application Guides section below for specific application information
Wet-on-Wet (Fully Reinforced):
Single ply Overlay
GRP
Plywood/OSB
Warm roof over PIR
Inverted roof
Green roof
Torch on felt overlay
Asphalt
Paving slabs
New build waterproofing
Recommended Primers - For concrete, EPDM and TPO single ply use PU1000 primer.
Important - Silicone-based mastics should not be used as they are incompatible.
Accelerated: Only recommended for trained contractors; contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] before purchasing or using Desmopol in an accelerated application.
Others:
Asbestos
Metals
Swimming pools
Potable water tanks
Transparent-Desmopol T
Heavy Traffic Tecnotop 3000
Application Guides
Below are specific application guides for Eagle Desmopol (Click to download):
Additional coat of Desmopol (without matting, Desmoplus optional) 0.5kg/m² after the initial application has cured (minimum 3 hours with Desmoplus, 24 hours without)
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
What’s the coldest temperature this can be applied at?
Answer from Rawlins’ Technical Team:
This product can be applied in temperatures as low as -5C, with the use of Eagle Desmoplus, which is an additive to allow the membrane to be applied in low temperatures or in adverse weather conditions.
Below 2C, this product won't cure without the addition of Eagle Desmoplus.
If applying wet on wet, the minimum temperature is 2C and rising.
Dudley afordham on 2023-09-15 22:00:53
Question:
Does your product adhere to concrete that has fibre glass in it
Answer from Rawlins’ Technical Team:
Yes this product can be applied to glass fibre reinforced concrete assuming it is clean, dry, sound, prepared and primed with Eagle Primer PU1000.
Tim Newton on 2023-03-16 15:09:11
Question:
Can Desmopol be used on an existing "Roofkrete System 4" flat roof and what would be the recommended preparation and priming process. Thanks
Answer from Rawlins’ Technical Team:
Unfortunately we are not familiar with Roofkrete System 4, please can we ask for more information on the make up of the system, pictures of the areas in question, size of the roof and any other relevant information.
Can this product be used on an old roof previously coated with Bullet Roof Mono?
Answer from Rawlins’ Technical Team:
Assuming the old roof is clean, dry, sound and prepared as detailed in the technical data sheet this product would most likely adhere to the previously applied Bullet Roof Mono.
We would recommend to test for compatibility and adhesion on a small area prior to full application.
The more simple option to avoid a compatibility option would be to use Bullet Roof Mono instead.
Gordon Millington on 2022-11-13 16:45:19
Question:
I have just laid a concrete floor with a damp proof membrane in a basement utility room. Is Desmopol ok to coat this floor and do I need to seal it with your primer? - thanks - Gordon.
Answer from Rawlins’ Technical Team:
No, while this product can be applied to a concrete substrate as part of a system it is not usually used for a floor.
Once the concrete floor has been left to dry out, approximately 4 weeks per inch of slab depth, the concrete is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Rust-Oleum 7200 Floorcoat PU.
This is available in many RAL, NCS or BS colours in a satin or gloss finish.
Mr brown on 2022-05-19 11:23:53
Question:
When measuring a roof how many litres per meter do I allow for
Answer from Rawlins’ Technical Team:
The coverage rate for this product is 1.5kg – 2kg per m².
This product is normally used as part of a system in either a two coat reinforced system or a 1 coat un-reinforced system.
Can Eagle Desmopol Liquid Polyurethane Membrane be used over a product that has been applied to fill a couple leaks already, on a balcony that is walked on, that contained a hybrid polymer, N-(3-(trimethoxysilyl)propyl)ethylenediamine called Stixall Extreme Power. If not is there another product in your range that you can recommend?
Answer from Rawlins’ Technical Team:
Stixall Extreme Power, does state that they are over paintable, but we would recommend you test for compatibiltiy and adhesion prior to full application.
Desmopol can be used on balconies assuming the substrate is compatible and a complete system is used including Eagle Tecnotop 2C.
Mr Harper on 2021-04-07 21:12:32
Question:
I have felt on top of my brick shed can I but this straight on the top of felt yes or no I just want to waterproof it
Answer from Rawlins’ Technical Team:
Assuming the felt roof is clean, dry, sound and prepared as detailed in the Technical Data sheet this can be applied to a felt roof.
We would recommend looking at the Application Guide for Bitumen Felt, this can be found in the datasheets tab on the product page.
Is the hardener included in the order for a tin of Technipol? I want to coat an old Zinc flat roof, do I need any fibreglass matt?
Answer from Rawlins’ Technical Team:
Eagle Desmopol Liquid Polyurethane Membrane is a single pack product so it doesn't have a hardener. There are some additives to accompany if required such as Eagle Desmoplus and Eagle Desmothix. Eagle Tecnoband 225g Matting would be recommended for your whole roof area.
Eagle Desmopol Liquid Polyurethane Membrane is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Use Eagle Tecnoband 225g Matting in combination with Desmopol Liquid Polyurethane Membrane for wet-on-wet applications. The bound fibre mat is available in rolls from the drop-down menu. More Information Delivery Info
Eagle Tecnotop 2C, a 2-component polyurethane resin for protection of high-traffic flooring that forms a hard and strong continuous film with excellent adhesion and mechanical properties, resisting abrasion and stress, algae and mould growth, weathering, extreme temperatures, and UV radiation.Gloss finish Ideal for high-traffic areas in...
An additive to be mixed with Desmopol Liquid Polyurethane Membrane to improve application in one layer, eliminating air bubbles, increasing tensile strength, speeding up drying times, and allowing the membrane to be applied in low temperatures or adverse weather. More Information Delivery Info