A two-component, high performance, exceptionally tough protection coat which can be used to provide wear and abrasion resistance, and to create anti slip surfaces when used in conjunction with a quartz aggregate.
High adhesion
High elasticity
High resistance to abrasion, atmospheric pollutants, and UV radiation
Applied by brush, roller, or airless spray
Two part System: Mono Top 10kg kit – 7.2kg + 2.8kg pigment
Please Note: This product is also available inDark GreyandWhitesubject to a 4 week lead time - Please contact us on0113 2455450 (option 1) or send a message to [email protected] for more information
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Bullet Roof Mono Top is a two-component, exceptionally tough protection coat which can be used to provide wear and abrasion resistance, and to create anti slip surfaces when used in conjunction with a quartz aggregate. Mono Top can withstand heavy pedestrian foot traffic and vehicle traffic. Being fully aliphatic, it also has very high UV resistance, and can also be used to further extend the service life of the Bullet Roof Mono system in excess of 35+ years in normal use.
This enables the Bullet Roof Mono system to be used in applications of extreme wear and abrasion such as balconies and car parks. Mono top can be sprayed using airless spray to refurbish existing roof sheets (plastisol coated steel, asbestos etc) when used in conjunction with the correct primer (contact our Rawlins Paints' Technical Team on Tech - 0113 2455450 (option 2) or [email protected]) to provide unparalleled levels of protection from the elements, extending the existing structures serviceable life for additional decades.
Bullet Roof Mono Top is supplied as a two part system: Mono Top 10kg kit – 7.2kg + 2.8kg pigment.
Note: Dark Grey and White colours in this product are subject to a lead time - Light Grey is readily available ex. stock.
High resistance to abrasion, atmospheric pollutants and UV radiation
Applied by brush, roller, or airless spray
Product Specification
Technical Data
Bullet Roof Mono Top
Specific weight:
1,31±0,07 kg/l
Viscosity at 20°C UNI EN ISO 2555:
2500 ± 500 mPa.s
Solid content EN ISO 3251:
65% in volume
Theoretical consumption:
150-400 g/m² per coat
It depends on the colour
Shelf Life:
When kept in the original sealed packs in a dry protected place at temperatures from + 5°C to + 35°C, the product will keep for 12 months
Application Methods
When using Mono Top to extend the service life of the Bullet Roof Mono system in normal/low traffic areas it can be applied at a rate of 0.150-0.400 kg m² in a single coat
When using Monotop as a protection coat in high traffic areas, two coats must be applied
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Bullet Roof Mono Top is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
BBA Approved and formulated to the highest specification, this flat roof paint can be applied over almost any surface with or without full reinforcement dependent on performance/specification requirements and can achieve life expectancies of up to 25 years.Moisture cured allowing application in most weather conditions Excellent adhesion...
Developed to meet the demand for a quicker yet still penetrating single pack primer. Bullet Roof Quick Prime is ready to be overcoated in as little as 20 minutes. Suitable for most roof substrates including, concrete, wood and bituminous membranes.Colour: Amber Solids: 46% by weight, 40% by volume Theoretical consumption: 150 g/m² ASTM...