RSL AquArmor AC (Ecuseal)

    ESST
    RSL2957

    A co-polymer emulsion, elastomeric roof and wall coating. It uses the latest technology to waterproof internal and external surfaces. 

    • Weather resistant
    • High elasticity
    • Easy to apply
    • Versatile
    • Hygienic
    • Decorative
    • Please Note: This product is subject to a 28 Working Day lead time

    Colour
    Pick a Colour
    • Current colour: Black
    Close colour picker
    • White
    • Black
    • Poppy Red
    • Salsa Red
    • Stirling Grey
    • Flint Grey
    • Savannah Yellow
    • Kingfisher Blue
    • Tuscan Green
    • Forest Green
    • Marigold
    Size
    Finish
    £100.81(ex. VAT)
    £120.97 (inc. VAT)
    Quantity
    Please choose your colour
    This Combination may be Subject to Extended Lead Times

    Description

    RSL AquArmor AC is perfect for providing protection from concrete carbonation, making it essential for waterproofing walls. Its components also offer a convenient way to weatherproof your roof, in simple and hygienic fashion. 

    It boasts strong adhesion, is economic and lightweight, and can be retained at low temperatures leaving an attractive, aesthetic finish.

    Recommended Uses

    • Domestic roofs
    • Interior walls
    • Farms
    • Rendered walls
    • Public buildings

    Preparation and Priming

    Surfaces to be coated must be clean, dry and free of any contaminants that could impair good adhesion. Ensure good drying conditions prevail throughout the application and cure of the product. Good adhesion is obtained on all sound surfaces with adequate roughness or porosity, e.g. slate, burnt clay and concrete tiles, bituminous roofing felt, asbestos cement, concrete and cement render. For other surfaces see below.

    Cracked roofing or roofs with expansion joints or other structural joints prone to movement must be treated with a reinforcing scrim, using the procedure described below. The application of a scrim will increase the strength and wearing properties of the roofing membrane in all situations.

    Surface Pre-Treatment

    Greasy or oily contamination: Degrease and thoroughly dry; prime as required.

    Concrete etc. with water repellent treatment, blown asphalt or cold bitumen: Prime with Resuseal WB Clear and check to ensure that the primer wets out on the surface.

    Asbestos-cement, or concrete etc. with powdery surface: Prime with RS Cemprime or Resuprime W.B.

    As above, but heavily powdered, loose or flaking surface: Brush thoroughly with stiff wire brush. Prime with RS Cemprime or Resuprime W.B.

    Bare iron or steel: De-rust fully, apply Resuprime ZP anti-corrosive primer and allow to cure before applying membrane.

    Galvanised iron: Degrease if new. Apply a suitable etch or emulsion-based anti-corrosive primer.

    Wood: Apply suitable wood primer and leave to dry as recommended by manufacturer before applying membrane with reinforcing scrim.

    Plastics: Whether expanded, foamed or in sheet form, it may provide insufficient key and should be checked with a small scale trial to assess adhesion.

    Application: Premix the RSL AquArmor AC to a uniform consistency, to re-disperse any separation, using a slow speed drill and paddle mixer. Apply a uniform heavy-brushed or rolled coat of RSL AquArmor AC liquid membrane to the surface. Immediately bed the scrim into the wet coat, following the contour of the surface, taking care not to push the membrane into gaps. Leave for the recommended drying period and finish with one sprayed coat or two brushed or rolled coats.

    The interval between brushed coats must allow good drying but should not exceed three days.

    Product Details
    2957-975011

    Data sheet

    Manufacturer
    RSL
    For Use By
    Professional Use
    Interior / Exterior Use
    Internal and External
    For Use On
    Concrete, Blown Asphalt, Cold Bitumen, Asbestos Cement, Iron, Steel, Wood, Plastic, Galvanized Iron
    Sheen
    Satin
    Colour
    Standard / Ready Mixed
    VOC Levels
    Ultra-Low (5-49 g/l)
    Single, Two or Three Pack
    Single
    Pack Size
    10L
    Coverage
    10 litres will cover 40m sq. @ 250 microns wet film thickness.
    Touch Dry
    6-8 Hours
    Colour(s)
    Standard Colours
    Base Type
    Water-Based
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    RSL AquArmor AC (Ecuseal) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT