806 Roof Primer
Manufacturer: Rawlins Paints
Provides vital stabilisation of highly friable/porous surfaces such as concrete, asbestos cladding, sheeting and guttering.
Provides vital stabilisation of highly friable/porous surfaces such as concrete, asbestos cladding, sheeting and guttering prior to the application of 803 Smooth Waterproof Roof Coating or 802 HB Waterproof Roof Coating ensuring they are able to deliver optimum waterproofing performance.
• Ready to use
• Rainfall immediately after application has no adverse effect
• Solvent based
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|John Bleakley on 24/09/2018|
Need to seal overlaps on pressed cement roofing sheets then seal full sheets. Will also need fungicidal treatment. Please advise which products in which order and if use of re-enforcing is needed for joints. Standard double garage size.
As a minimum we would recommend cleaning the surface, applying Britannia Fungicidal Wash Solution and allowing to act. Wash down and allow to dry and prime with Britannia Durashield FD Primer and allow to dry. Scrim joints using Britannia Reinforcing Scrim in a basecoat of Britannia Durashield. When dry, apply a final coat of Britannia Durashield to entire area.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close