Tor Elastamat Regular (SS6000116 / SS6000025RL / SS6000830) is a random weave chopped strand glass fibre mat (nominal 100g/m²) for the reinforcement of Tor liquid applied roof waterproofing systems. It is used as a full reinforcement on flat roof applications and where ponding is evident, and as localised or partial reinforcement in other areas.
Rust-Oleum Dacfill HZ/SB Glass Fibre Fleece
Protection with Dacfill glassfibre reinforcement fleece provides additional mechanical strength and is very easy to apply. Recommended uses are for the reinforcement of the first coat of Dacfill or Dacfill HZ.
Protection with Dacfill glassfibre reinforcement fleece provides additional mechanical strength and is very easy to apply.
- Improves mechanical strength in Dacfill, Dacfill SB or Dacfill HZ systems
- Easy to work with
- Easy to tear, ideal for finishing details like chimneys
- For water based and solvent based coatings
- Improved waterproofing
- Good drapability
When Rust-Oleum Dacfill HZ/SB Glass Fibre Fleece comes in contact with the Dacfill/HZ coating, its fibres will come loose - becoming limp. This allows for easier manipulation and application to the edges and bumps on a roof, chimney or around a skylight.
Application of Rust-Oleum Dacfill HZ/SB Glass Fibre Fleece requires a first coat of Dacfill HZ, followed by adding the fleece in the wet paint and then rolling again. In this way, it is ensured that the fibres are completely lying flat and are covered correctly with a layer of paint - as opposed to be exposed and sticking out through the paint film. After drying, apply a second coat of Dacfill or Dacfill HZ.
Recommended conditions for the application of this product are 10 - 35°C, with a humidity between 35 and 85%.
Be the first to ask a question about this product!
Tor Elastaseal FIA Application Gun (SS1000001) is a specially developed aerosol gun used to dispense Tor Elastaseal FIA (Foaming Insulation Adhesive) (SS1000002) used for the bonding of roofing insulation boards to roofing substrates and membranes including asphalt, felt, vapour control layers (VCLs) aged single ply membranes, etc.
A reinforcement fleece for the first coat of Murfill Waterproofing Coating on structural surfaces where required. When fleece is introduced it offers maximum durability, flexibility and strength to the system.
Rustoleum Dacfill SB Embedment Coat is a high-build basecoat for use in conjunction with Dacfill Glass Fibre Fleece to provide a reinforced base for the Dacfill SB Waterproofing system. Its deep pink colour offers a low sheen finish.
Tor White Aluminium Oxide Grit (SS5001030 / SS5001050) is a wear resistant aggregate for the enhancement of slip resistance in Elastadeck balcony coating systems. Available in 30 and 50 mesh sizes.
Tor Elastamat HD (SS6000225) is a random weave chopped strand glass fibre mat for high strength reinforcement of Tor liquid applied roof waterproofing systems. It is used as a full reinforcement on heavy duty flat roof applications and where ponding is evident, and as localised or partial reinforcement in other areas.
The new Tortrim range has been developed to provide detail plastic trims to produce a neat edge to Tor roof systems. Bond It PU18 is a one part moisture curing polyurethane fast grab adhesive/sealant for bonding trim pieces together.
Thermilate PRO Roof Primer is a water-based primer specially formulated to prepare clay roof tiles for painting with Thermilate PRO Insulating Roof Coating. Thermilate PRO Roof Primer aids adhesion by producing a bond between clay roof tiles and Thermilate PRO Insulating Roof Coating to avoid flaking or peeling.
A specially-formulated primer for application on to metals to enhance adhesion properties, and allow the primer to physically bond onto the metal using an incorporated activating acid that "etches" into the substrate. Advantages For Aluminium, Copper and Galvanised Steel surfaces. White in colour. Upto 12-months shelf life.
Tor Aqualife SP Multi-Surface Primer (EM367) is a single pack, low odour, water based primer based on a special acrylic emulsion pigmented with inorganic pigments and extenders. It is a multi-surface primer for use over many different substrate types, eg. existing painted surfaces, plaster, concrete, ceramic tile, wood, fibreglass, steel, galv, aluminium,...
Tor Elastaseal Z Embedment Coat (RC140) is a cold applied single pack, ultra high solids moisture activated elastomeric urethane coating free from solvent odour. For application in conjunction with Elastamat glass fibre reinforcement as the basecoat in Elastaseal Z roof waterproofing membrane systems. A high build, heavy duty coating, providing durable,...
Sika MultiSeal is a self-adhesive sealing tape made from bitumen rubber compound, protected by a reinforced aluminium film. Use for general repair to existing flashing, roofs including sheet metal work, facades, broken roof tiles, leaking gutters, duct work, sealing projections through the roof. Very easy to apply, cold applied, self-adhesive, good...
Tor Raincoat Stabilising Sealer (RC351) is a modified acrylic resin based, low viscosity solution containing a biocidal additive and organic solvents. Tor Raincoat Stabilising Sealer is for the priming/stabilising of bare, cementitious (eg. asbestos cement, fibre cement etc) porous and friable pitched roofing substrates prior to application of Raincoat...
Rust-Oleum Mathys Primer 44 HS has a large fixation capacity for stabilising loose particles and improving the adherence of subsequent topcoats. ADVANTAGES Unsaponifiable Good UV resistance Excellent fixation on roofs Very flexible Chlorinated rubber technology, solvent-based Quickly water-resistant (1 hour after application at 20 °C)
Tor Raincoat APA (RC353) is a single pack coating based on a specially modified acrylic resin system containing anti-corrosive pigments and inert extenders. Tor Raincoat APA is an adhesion promoting and anti corrosive intermediate coating for use in conjunction with Raincoat roof coatings and cladding finishes over PVDF and other plastic coated substrates.