GacoFlex SF2000 SeamSeal is a silicone-based, solvent-free, single-component waterproof elastomeric moisture-curing sealant combined with a reinforcing agent. Intended for application over cleaned and primed roofs as a joint and fastener treatment in place of fabric and/or elastomeric sheet tape. It may also be used to repair blisters in spray...
Rustoleum Dacfill SB Embedment Coat is a cold liquid applied, 1 component, ultra high solids, moisture activated, elastomeric urethane roof coating used as a basecoat for with Dacfill Glass Fibre Fleece to provide a reinforced base for the Dacfill SB Waterproofing system.
Acting as a primer undercoat for Dacfill SB Topcoat, it is part of a full waterproofing system for flat roofs, which when used and specified correctly can give up to 25 years' life expectancy. The Dacfill SB Waterproofing System will protect flat-roofs from UV and water-damage - caused by pooling water.
Once the roofing area has had all cracks and holes, blisters and splits repaired, and has been correctly prepared, with all loose debris - moss, fungi, algae growth, excess water - removed, Rustoleum Dacfill SB Embedment Coat can then be applied over larger areas by roller, and by brush for smaller, more detailed areas. Please ensure the surface is as dry as possible to improve applied performance.
- Touch dry after 4 hours
- Can be recoated after 12 hours and within 5 days
Theoretical coverage - 1 - 2 m² per litre
Practical coverage will depend on the porosity and roughness of the substrate, and any material losses during application
- Typical Coverage (per coat)
- 1-2m² per litre
- Touch Dry
- 4 Hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
Tor Elastaseal FIA Gun Cleaner (SS1000003E8) is used to clean out the Tor Elastaseal FIA Application Gun after use. It flushes out remaining adhesive leaving the gun mechanism clean and ready for use.
Tor Elastascrim FT (SS6000140) is a non-flammable, semi-elastic, putty-like butyl rubber based strip encapsulant/sealant. Supplied in roll form on siliconised paper release backing for use as a formable pre-coat encapsulant and sealant over roof sheet bolts etc. Also usable as a lap joint gap filler/sealer on sheeted (profile metal, fibre-cement etc)...
A specially-formulated primer for application on to metals to enhance adhesion properties, and allow the primer to physically bond onto the metal using an incorporated activating acid that "etches" into the substrate. Advantages For Aluminium, Copper and Galvanised Steel surfaces. White in colour. Upto 12-months shelf life.
A metal primer for ferrous metals such as iron and steel that offers sound anti-corrosion properties and superb capacity and coverage. Can be used over existing paintwork. Examples of Use Bridges Metal artwork Metal trusses Warehouses Factories
The new Tortrim range has been developed to provide detail plastic trims to produce a neat edge to Tor roof systems. Bond It PU18 is a one part moisture curing polyurethane fast grab adhesive/sealant for bonding trim pieces together.
Protection with Dacfill glassfibre reinforcement fleece provides additional mechanical strength and is very easy to apply. Recommended uses are for the reinforcement of the first coat of Dacfill or Dacfill HZ.
Tor Aqualife SP Multi-Surface Primer (EM367) is a single pack, low odour, water based primer based on a special acrylic emulsion pigmented with inorganic pigments and extenders. It is a multi-surface primer for use over many different substrate types, eg. existing painted surfaces, plaster, concrete, ceramic tile, wood, fibreglass, steel, galv, aluminium,...
Tor Elastamat Regular (SS6000116 / SS6000025RL / SS6000830) is a random weave chopped strand glass fibre mat (nominal 100g/m²) for the reinforcement of Tor liquid applied roof waterproofing systems. It is used as a full reinforcement on flat roof applications and where ponding is evident, and as localised or partial reinforcement in other areas.
Britannia Hi-Bond Asphalt Adhesive is a high adhesive bonding agent for use between asphalt and conventional building substrates. Eliminates the need for traditional methods of surface preparation: roughening, scrabbling, rendering and mechanical fixing. Advantages Water-based modified rubber solution Safe and eco-friendly Orange in colour For...
Tor Elastascrim BT is a non-flammable, butyl, rubber based, self-adhesive tape with a polymeric textile reinforcement protection fleece. Used for the bridging of roof sheet lap joints, stabilised cracks, movement joints, small gaps, abutment details etc, prior to application of Tor roof waterproofing and protective coating systems etc.
Tor Non-Taint Bitumen Primer (IM902) is a general purpose bituminous paint that can be used for steelwork, haysheds on farms etc. Also used for promoting adhesion of TorVap VCL / CM on Elastatherm TF square edged insulation, porous surfaces or in all cases where temperature is below 5°C.
Tor Elastaseal Z Metal Primer (RC145) is an Epoxy/Polyamide binder with anti corrosive and inorganic pigments and thinned with Alcohol solvents. A low odour, high performance two pack epoxy primer for manually cleaned steel. Particularly of interest in “safety” areas where “blast cleaning” is not allowed.
Rust-Oleum Mathys Primer 44 HS has a large fixation capacity for stabilising loose particles and improving the adherence of subsequent topcoats. ADVANTAGES Unsaponifiable Good UV resistance Excellent fixation on roofs Very flexible Chlorinated rubber technology, solvent-based Quickly water-resistant (1 hour after application at 20 °C)
Tor White Aluminium Oxide Grit (SS5001030 / SS5001050) is a wear resistant aggregate for the enhancement of slip resistance in Elastadeck balcony coating systems. Available in 30 and 50 mesh sizes.