Sika Concrete Primer

    Sika4886
    SIK4886

    Sika Concrete Primer, a two component, rapid curing, high solids, solvent based polyurea primer that is used as a bonding agent on cementitious substrates for Sikafloor 405/406.

    • For Professional use
    • Significantly reduces the likelihood of outgassing from susceptible substrates
    • Seals and primes substrates enabling over-coating at a minimum of 30 minutes (under ideal conditions)
    • Long pot life
    • Helps to stabilise substrates
    • Can be used between coats to locally address pin-holing

    Colour
    Size
    £101.33(ex. VAT)
    £121.60 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Sika Concrete Primer is a two component, rapid curing, high solids, solvent based polyurea primer, used as a bonding agent on cementitious substrates for Sikafloor 405/406

    Used as the primer for the Sika Balcony Fast Cure I system.



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • For Professional use
    • Significantly reduces the likelihood of outgassing from susceptible substrates
    • Seals and primes substrates enabling over-coating at a minimum of 30 minutes (under ideal conditions)
    • Combines a rapid cure time with a long pot life
    • Helps to stabilise substrates
    • Easy application by brush or roller
    • Can be used between coats to locally address pin-holing



    Product & Technical Data


    Appearance / ColourColourless to pale yellow
    Packaging11.5 litre (~ 11.78 kg) containers; 9l part A + 2.5l part B
    Storage Conditions / Shelf Life12 months from date of production if stored properly in original, unopened and undamaged sealed container in a cool, dry location away from direct sunlight
    Chemical BaseTwo component solvent based polyurea
    Density~1.02 kg/l
    Flash PointPart A: 40°C
    Part B: 73°C



    Application Details


    Substrate Quality

    Substrates should be free from laitance, dust, oil and grease achieved by wire brushing or mechanical preparation.

     

    Substrate Preparation

    Allow a minimum of 28 days before overcoating new concrete. The concrete should have a Pull off strength ≥1.5 N/mm 2 . Defects or damage to concrete decks must be made good using a proprietary polymer modified repair mortar. Any repairs should be allowed a minimum of 72 hours to cure and until such time as the moisture content has fallen to the permissible level.



    Application Conditions / Limitations


    Substrate Temperature5°C min. / 30°C max.
    Ambient Temperature5°C min. / 30°C max.
    Substrate Moisture ContentVisible damp free (maximum 18% wood moisture equivalent).
    < 6% pbw moisture content Test method: Sika ® -Tramex meter, < 4% CM - measurement or Oven-dry-method.
    No rising moisture according to ASTM (Polyethylene sheet).
    Dew PointBeware of condensation! Surface temperature during application must be at least +5°C above dew point.
    Consumption1 or 2 coats with a consumption of ~0.130 kg/m 2 per coat depending upon surface roughness and absorption.



    Application Instructions


    Mixing

    • Part A : Part B = 78 : 22 ( by volume)
    • Part A : Part B = 82 : 18 ( by weight)

     

    Application Method / Tools

    Ensure surface is dry and free from dust and laitance. Previously primed areas must be free from contamination before re-priming or top coating. Product may be applied to damp surfaces but these must not be visibly wet (see substrate moisture content).

    Prepare primer by mixing the base until uniform. Add the activator and re-mix until homogeneous.

    Apply between 5 and 30°C. Air and substrate temperatures should remain a minimum of 5°C above dew point throughout the application and curing periods.

    Apply by brush or roller.

    Brush or roller. Use brushes for small areas only.

     

    Potlife

    • 1 hour at 20°C
    • Note: Pot life will decrease at higher temperatures.

     

    Waiting Time / Overcoating

    At 20°C:

    • Dry to touch 10 minutes
    • Dry through 30 minutes
    • Apply an additional coat if more than 24 h pass before coating

    Note: The product turns brown/yellow when kept exposed/unprotected by a coating

     

    Cleaning of Tools

    Clean all tools and application equipment with Thinner C immediately after use. Hardened / cured material can only be mechanically removed.

     

    Notes on Application / Limitations

    Do not apply in wet weather or to wet surfaces.

    Product Details
    4886-939999

    Data sheet

    Manufacturer
    Sika
    For Use By
    Professional Use
    Interior / Exterior Use
    Exterior Use
    For Use On
    Concrete
    Flat Roofs
    Application Method
    Brush
    Roller
    Single, Two or Three Pack
    Two-Pack
    Pack Size
    4.5L
    11.5L
    Touch Dry (at 20°C)
    10 minutes
    Dry to Recoat (at 20°C)
    30 minutes
    Pot Life (at 20°C)
    1 hour at 20°C
    Recommended Thinner/Cleaner
    Sika Thinner C
    Max. Application Temperature
    30°C
    Min. Application Temperature
    5°C
    Density
    ~1.02 kg/L
    UN Number
    UN3066
    Consumption
    Approx. 0.13 kg/m2 per coat
    Flashpoint
    Part A: 40°C
    Part B: 73 °C
    Base Type
    Solvent-Based
    Suitable For Use On
    Flat Roofs
    Suitable For Use On
    Concrete
    Application Method
    Roller
    Application Method
    Brush
    Manufacturer
    Sika
    Product Usage Type
    Primer
    Product Type
    Polyurea
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Sika Concrete Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Sika Thinner C

    Sika Thinner C is a specially formulated blend of solvents designed to mix with its compatible Sika products to create an optimal consistancy for application whether it be for brush, roller or spray. It can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as...

    Price £45.02 (ex. VAT)
    In Stock and Available for Delivery

    Sika Concrete Primer LO

    Sika Concrete Primer LO is a two component, low odour, rapid curing, high solids, hybrid polyurea primer used as a bonding agent on cementitious substrates for consistent and durable adhesion of Sikaroof, Sikalastic and Sikafloor Systems.Low odour application Fast curing - overcoating possible after 30 minutes Significantly reduces the...

    Price £108.51 (ex. VAT)
    In Stock and Available for Delivery