GacoFlex E5320 2-Part Epoxy Primer/Filler

Manufacturer:

GacoFlex E5320 2-Part Epoxy Primer/Filler is a two-component, water-based epoxy primer that is ideal for use on most roofing surfaces including metal roofs and flashings. This easy-to-apply primer bonds to properly prepared roofing surfaces and improves adhesion of GacoFlex silicone coatings and other top coats, especially on weathered surfaces that are difficult to get completely clean.

Bulk Buy

£224.00 tax excl.

£268.80   tax incl.

Product Description

GacoFlex E5320 2-Part Epoxy Primer/Filler is a two-component, water-based epoxy primer that is ideal for use on most roofing surfaces including metal roofs and flashings. This easy-to-apply primer bonds to properly prepared roofing surfaces and improves adhesion of GacoFlex silicone coatings and other top coats, especially on weathered surfaces that are difficult to get completely clean.

Features & Benefits

  • Excellent adhesion to most surfaces
  • Improves GacoPro Roof Coating adhesion
  • Helps prevents asphalt bleed-through

Coverage

When used unreduced as a block filler, the coverage is 70-100 sq. ft. per gallon (6.5 to 9.3m² / 3.78L). When reduced with one pint of water per gallon (0.5L per 3.78L) of mixed GacoFlex E5320 and applied to smooth concrete, the coverage is 200-250 sq. ft. per gallon (18.6 to 23.2m² /3.78 L).

NOTE: Actual coverage may be less due to surface profile, losses due to overspray and wind, and residual coating left in the container.

GacoFlex E5320 2-Part Epoxy Primer/Filler may be applied by brush, roller or spray;

  • On single ply membrane roofs, apply one coat at the rate of 1 gallon per 500 sq. ft. (combined material will need to be thinned 10%-20% with water to achieve this spread rate).
  • On metal, apply one coat at the rate of 1 gallon per 300 sq. ft.
  • On asphalt-based surfaces including smooth cap sheet, apply 2 separate coats of 1 gallon per 250 sq. ft. For granulated surfaces, apply 2 separate coats of 1 gallon per 200 sq. ft.

Allow the first coat to dry for a minimum of 2 hours before application of the second coat. Allow to dry a minimum of 6 hours before application of top coat. Dry time is dependent upon temperature and humidity.

For further details download the Product Data Sheets from the 'Downloads' section below.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)1.7 - 6m² per litre
Touch Dry2 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable