Tor Elastascrim FT
  • Tor Elastascrim FT

Tor Elastascrim FT

SS6000140

This product is temporarily unavailable; in the meantime, our technical team recommend Bullet Roof Reinforcement Tape as a great alternative - use discount code MAY10 at checkout to save 10%!

Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

Tor Elastascrim FT (SS6000140) is a non-flammable, semi-elastic, putty-like butyl rubber based strip encapsulant/sealant. Supplied in roll form on siliconised paper release backing for use as a formable pre-coat encapsulant and sealant over roof sheet bolts etc. Also usable as a lap joint gap filler/sealer on sheeted (profile metal, fibre-cement etc) roofs etc.

Size
£157.43
VAT excluded

£188.91 Tax incl.
Quantity

Description

Tor Elastascrim FT (SS6000140) is a non-flammable, semi-elastic, putty-like butyl rubber based strip encapsulant/sealant. Supplied in roll form on siliconised paper release backing for use as a formable pre-coat encapsulant and sealant over roof sheet bolts etc. Also usable as a lap joint gap filler/sealer on sheeted (profile metal, fibre-cement etc) roofs etc.

Preparation

Ensure all fixings and surfaces are sound, clean, dry, oil-free and dust free. Lightly abrade hard coatings and plastics. Mechanically remove corrosion, chalking, etc. from metal and surrounding surfaces. Treat porous surfaces with a suitable Tor primer/stabilising solution and allow to through-dry before applying Elastascrim FT. Bare metal surfaces should be correctly prepared and primed with suitable materials conducive to the type/condition of the surface and the intended protective system and allowed to through-dry before applying Elastascrim FT.

Ensure (by trial application if necessary) that all contact surfaces are suitable for application and adhesion of primers (where applicable) and Elastascrim FT.

Application

Unroll the tape and cut to the desired length. Encapsulate protrusions (bolts etc.) by placing centrally over the detail then press and mould firmly and tightly into place, working well into small gaps etc and finish smoothly and firmly onto the surrounding surface.

For gap filling, rework the compound into a “rounded” strip then place and press firmly and as far as possible into the prepared gap. Encapsulate the joint further if necessary using Tor Elastascrim BT (SS6000118 / SS6000120) and relevant coatings to produce a fully waterproofed joint.

Product Details
SS6000140
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send