Aqualife SP Multi-Surface Primer for use over many different substrate types, such as:
Existing painted surfaces
Plaster
Concrete
Ceramic tile
Wood
Fibreglass
Steel
Galvanising
Aluminium
Copper
Rigid plastics
The low-odour primer can be used internally and externally, applied by brush, roller or sprayer, and overcoated with a wide range of topcoats.
Features & Benefits
Multi-purpose primer
Single pack
Water-based
Low odour
Can be used on a wide range of internal and external substrates and surfaces
Apply by brush, roller or sprayer
Touch dry after 2 hours
Leave for 16 hours before overcoating
Not suitable for use with flexible plastics, or for tiles exposed to prolonged periods under standing water or immersion conditions.
Product Information
Single pack low odour water based primer based on a special acrylic emulsion pigmented with inorganic pigments and extenders.
Product reference
EM367
Volume solids
40%
Typical thickness
40 microns dft from 100 wet
Theoretical coverage
10 square metres per litre
Practical coverage
Reduce theoretical coverage by up to 20%
VOC content
25 gms/litre
Surface Preparation
Steel - Remove any loosely adhering rust or scale and wire brush back to a sound substrate.
Ensure new metal surfaces (eg. galvanising, aluminium, copper) are thoroughly degreased.
Hard Glossy painted surfaces should be lightly abraded and washed down.
Ensure all surfaces are clean and dry and free of surface contamination such as oil or grease.
Not suitable for use on flexible plastics.
Application Details
Mix ratio
N/A
Method of application
Brush, roller or spray
Thinner
Water (when required)
Cleaner
Water for cleaning equipment
Pot Life
N/A
Drying Times
Substrate Temperature
Touch Dry
Hard Dry
Overcoating Interval
Minimum
Maximum
20°C
2 hours
4-6 hours
16 hours
Unlimited
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage & Handling
Storage
In a safe place out of the reach of children. Protect from frost.
Flash point
Non flammable
Limitations
The liquid paint and the freshly applied paint film must be protected from frost. Do not apply if the temperature is below 5oC or the relative humidity exceeds 85%.
Drying times will be extended in cold weather in unheated buildings.
Not suitable for tiles exposed to prolonged periods under standing water or immersion conditions.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tor Aqualife SP Multi-Surface Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...