Tor Elastaseal Z Embedment Coat
  • Tor Elastaseal Z Embedment Coat

Tor Elastaseal Z Embedment Coat

RC140

This product is temporarily unavailable; in the meantime, our technical team recommend Bullet Roof Mono as a great alternative - use discount code MAY10 at checkout to save 10%!

Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

Tor Elastaseal Z Embedment Coat (RC140) is a cold applied single pack, ultra high solids moisture activated elastomeric urethane coating free from solvent odour. For application in conjunction with Elastamat glass fibre reinforcement as the basecoat in Elastaseal Z roof waterproofing membrane systems. A high build, heavy duty coating, providing durable, long term protection for roofs.

Colour
Size
Finish
£252.00
VAT excluded

£302.40 Tax incl.
Quantity

Description

Tor Elastaseal Z Embedment Coat (RC140) is a cold applied single pack, ultra high solids moisture activated elastomeric urethane coating free from solvent odour. For application in conjunction with Elastamat glass fibre reinforcement as the basecoat in Elastaseal Z roof waterproofing membrane systems. A high build, heavy duty coating, free from solvent odour that provides durable, long term protection for roofs. To be used as a fully reinforced weatherproofing system.

Preparation

Inspect all surfaces to assess soundness of existing substrates or coatings. Where necessary prepare test areas. Roof surfaces must be clean, dry and free from all loose debris and be carried out before application of the coating. All areas of fungal growth, moss etc should be treated with Torkill W Fungicidal Wash (DM405) and neutralised residues removed.

Apply over Elastamat reinforced Embedment Coat (where necessary). Priming, where necessary should be carried out using suitable compatible materials. Contact Technical Department for further advice.

Application

Brush or roller. Apply at the prescribed system coverage rate to properly prepared areas. Immediately lay Elastamat glass fibre matting into applied coating, ensuring a minimum overlap of 50mm between sheets. Roll or tamp the surfaces to ensure full integration and saturation of the matting is achieved. Allow Embedment Coat to become firm before applying Elastaseal Z Top Coat(s).

Limitations

  • Do not apply if rain is imminent.
  • Overcoating must be carried out within the timescale stated otherwise further preparation may be necessary.
Product Details
RC140

Data sheet

Application
Brush, Roller
Coverage
0.8 - 1m² per litre
Touch Dry
8 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send